
7600S Double-beam UV-Vis spectrophotometer
Rapid quantitative elemental analysis
- Measuring range190~1100 nm 波长范围
- Illumination氘灯 + 钨灯组合光源
炉前成分、轧材力学性能、渗层与脱碳层检测的完整链路。

Rapid quantitative elemental analysis

Rapid quantitative elemental analysis

Rapid quantitative elemental analysis

Rapid quantitative elemental analysis
HOTVickers Hardness Tester
HOTVickers Hardness Tester

A TY-9620 at the furnace returns 18 elements in 90 s before tapping, cutting t…

An ICPS-7510 auto-samples every 30 minutes for total Cr, Ni and Zn, interlocki…

TY-9000 moves furnace analysis from six minutes in the lab to 90 seconds on th…

Q4 identifies the grade in 40 seconds and rejected 12 t of stainless tube with…

ICPE-9000 plus UV1800 cut Cr(VI), Ni, Cu and Zn testing from three days outsou…

The HMAS-HT1200 measured 1100 °C in vacuum with clear indentations, ±4 °C unif…

HVS-1000Z micro-Vickers at 0.1 kgf maps the gradient, turning nitrided case as…

HRC-150SMJ with direct MES upload measures 18 seconds per part, storing data a…

HRC-45M at 15N reduces indent depth from 80 to 18 µm, leaving thin walls undis…

HBRVS-187.5 with HBW 2.5/187.5 measures six points per casting in eight minute…

WAW-600C with automatic extensometer and dedicated grips cut a test to four mi…

Dedicated fixtures on a 500 kN frame evaluate nugget diameter and failure mode…

WAW-1000C with dedicated bolt fixtures and automatic rate control runs four mi…

WEW-1000D with ribbed grips and a bend attachment cuts a tensile-plus-bend set…

WDS-100G with a video extensometer cuts modulus scatter from ±6% to ±1.8% and …

HMAS-HT800 grades HSS work rolls by 600℃ red hardness per GB/T 4340.1 instead …

MC030-ZJUH5000/0.2 guided scraping of an 8 m grinder bed at 0.2 arcsec resolut…

MC030-MAT300/48/0.5 surveyed 2.4 m × 1.1 m housing windows by grid method; shi…

MMAS-4 rates QT450-10 nodularity per GB/T 9441 at the furnace in 15 minutes, r…

MMAS-100 automatically rates B-type inclusions per GB/T 10561; tracing the sla…

MMAS-8 measured 1.8% porosity per ASTM E562 point counting; after fixing the i…

WAW-1000D 1000 kN servo machine performs full-rope breaking tests to GB/T 8358…

WAW-600D tests rebar taper-thread splices one-way to JGJ 107, 600 kN covering …

Q8 OES completes 22-element ladle analysis in 40 s with 0.001% carbon detectio…

Q4 OES reads 18 elements including C, Si and Mg in 30 s at the furnace; CE hel…

HXZMP-1000 with 10% oxalic electrolytic etch prepares 304 stainless weld sampl…