HOTIMAS-HT900CM High-temperature Hardness Tester
High-temperature Hardness Tester
- 使用温度范围室温~800℃
- 炉腔温度范围≤900℃
高温合金、钛合金、复合材料的高温硬度、金相组织与力学性能检测案例。
HOTHigh-temperature Hardness Tester
HOTHigh-temperature Hardness Tester
HOTHigh-temperature Hardness Tester

High-temperature Hardness Tester
HOTHydraulic Universal Testing Machine
HOTHydraulic Universal Testing Machine

The HMAS-UHT1700CM indented the ceramic top coat in-situ at 1600 °C through th…

IMAS-HT1300CM logged 72-hour force-displacement curves and separated secondary…

HMAS-HT1300CM measures a three-point hardness gradient across ceramic top coat…

IMAS-HT700CM records 2-hour constant-load creep compliance with 12 points per …

Hardness at 1000 °C on HMAS-HT900CM replaces eight high-temperature bend runs …

WAW-600C with automatic extensometer and dedicated grips cut a test to four mi…

Dedicated fixtures on a 500 kN frame evaluate nugget diameter and failure mode…

WAW-1000C with dedicated bolt fixtures and automatic rate control runs four mi…

WEW-1000D with ribbed grips and a bend attachment cuts a tensile-plus-bend set…

WDS-100G with a video extensometer cuts modulus scatter from ±6% to ±1.8% and …

Q-2 saw, XQ-2B press and MP-2 dual platen raised output from 40 to 85 samples …

An HXZDQ-160 + HXQ-100 + HXZMP-2000 line raised PQR section acceptance from 85…

HXZDQ-160 mounting with HXZMP-3000 automatic polishing completes six samples i…

Low-speed sectioning with vacuum mounting and electrolytic polishing cut coati…

Precision sectioning plus vacuum mounting delivers results in 35 minutes with …

HMAS-HT900CM enabled in-house 800℃ hardness sampling of 690TT tubes per ASTM E…

IMAS-UHT1700CM performed 1600℃ in-situ indentation on C/C brake blanks; same-t…

HMAS-HT600 measured irradiated SA508-3 at 500℃ inside a hot cell, tracking the…

MC030-LD500/80/0.3 aligned a 12 m wing jig datum beam in both planes; after 3-…

MMAS-12 rated α-lath structure of TC4 EB welds per HB 5276; optimized focus cu…

MMAS-15 measured CFRP porosity per ASTM E2109 area method; a correlation with …

AGS-X25 250 kN electronic machine measures Rp0.2, Rm and A of TC4 plate to GB/…

JBS-300Z/500Z automatic impact tester with CDW-60 low-temperature bath runs Ch…

MGH high-accuracy CMM at ±(0.5+L/600) um scans 12 blade sections with 4-axis m…

Helios-N CMM measures flange hole positions and coaxiality on 1.2 m titanium c…

MC003-SCANARM laser arm scans CFRP skin trim lines in the curing room, reconst…

TY9000 full-spectrum OES rechecks Inconel 690 steam-generator tube chemistry w…

HXZMP-1000Z automatic prep with caustic etch reveals flow-line continuity and …

IMAS-HT1500CM mapped in-situ hardness on 5 sections of a DD6 SX blade at 1100℃…