HOTTechnik
Autocollimation metrology
自准直原理、角秒级角度测量、导轨直线度与机床几何精度评定。
Featured instruments
Alle→Produkte
HOT
HOT
HOT
MC030-MAT200/38/1 Photoelectric Autocollimator (10 m1″)
Photoelectric Autocollimator · 10 m1″
- 型号MC030-MAT200/38/1
- 物镜焦距200mm
Technik
Alle→Technik
Hot hardness: atmosphere, thermal equilibrium, indentation measurement
Impure atmosphere and a cold indenter can shift hardness by more than 10…
Vision system acceptance: what ISO 10360-7 actually tests
It is not one certified circle: length error, probing error and multi-di…
Case depth measurement: from eyepiece reading to automated judgement
Differences between manual and software case-depth results usually come …

From Arc-Seconds to Microns: Reading Conversion and Bridge Span in Autocollimator Measurement
1 arc-second is 4.85 μrad, i.e. about 0.97 μm height difference on a 200…

Calibrating Optical Polygons: Essentials of JJG 283 and the Permutation Intercomparison Method
Optical polygons are angle standards; two autocollimators in permutation…

Minimum-Zone Straightness Evaluation of Guideways: How Much Do the End-Point and Minimum-Zone Methods Differ
On the same broken line, end-point and minimum-zone straightness can dif…

Air Turbulence in Autocollimator Measurement: Sources, Magnitude and Field Countermeasures
A 0.1 °C gradient over a 1 m path deflects the beam by about 0.02″, and …

Orthogonality Calibration of Dual-Axis Autocollimators: Crosstalk Sources and Software Compensation
If the X and Y axes of a dual-axis instrument are not orthogonal, crosst…
