HOTY9025D Roundness Measuring Instrument
Roundness Measuring Instrument
- 主轴精度径向误差 / ±(0.025+5H/10000)μm
- 轴向误差±(0.025+6X/10000)μm
Ra/Rz 评定、截止波长选择、圆度仪调心与滤波设置。
HOTRoundness Measuring Instrument
HOTRoundness Measuring Instrument
HOTRoundness Measuring Instrument

Surface Contour Measuring Instrument
Impure atmosphere and a cold indenter can shift hardness by more than 10…
It is not one certified circle: length error, probing error and multi-di…
Differences between manual and software case-depth results usually come …

Ra is the arithmetic mean, Rz the ten-point height, Rt the total peak-to…

One cutoff step off shifts Ra by 30 %: the cutoff decides which undulati…

One section, four reference circles, four roundness values; minimum zone…

At the same Ra, lay parallel to sliding breaks in faster while cross-lay…