HOTYR3020CNC-T CNC Vision Measuring Machine
CNC Vision Measuring Machine
- 测量工件尺寸300*200*180mm
- X/Y轴测量精度3+L/200um
电池壳体、极片、结构件与轻量化材料的尺寸与力学评价。
HOTCNC Vision Measuring Machine
HOTCNC Vision Measuring Machine
HOTCNC Vision Measuring Machine

HOTHydraulic Universal Testing Machine
HOTHydraulic Universal Testing Machine

YRVMS4030CNC with bi-telecentric optics measures 142 dimensions in one program…

Five parts every two hours with a live CPK dashboard moved die maintenance fro…

YRVMS2515F with bi-telecentric optics and programmable ring light measures all…

YR-MV1080 dedicated vision with rotary feeding inspects at 0.8 s per part with…

YRVMS2010E measures needle OD, ID, bevel angle and chamfer on 30 pieces in ten…

WAW-600C with automatic extensometer and dedicated grips cut a test to four mi…

Dedicated fixtures on a 500 kN frame evaluate nugget diameter and failure mode…

WAW-1000C with dedicated bolt fixtures and automatic rate control runs four mi…

WEW-1000D with ribbed grips and a bend attachment cuts a tensile-plus-bend set…

WDS-100G with a video extensometer cuts modulus scatter from ±6% to ±1.8% and …

The CX-3/160 measures Ra and crown in one setup, cutting inspection from 35 to…

CX-3/160 profilometry to ISO 4287 revealed that early port-plate wear traced t…

CX-3/100 showed Ra within spec but Rmr only 42%, indicating an insufficient pl…

Y9025C measured three sections and ran a waviness spectrum, identifying sixth-…

XZ-230 revealed Ra of 0.08 µm passing while waviness of 0.4 µm failed; after l…

YR4030CNC-T measures 24 slots, bore concentricity and burr height at stacking …

HVS-5Z digital Vickers maps the induction-hardened case of EV shafts to GB/T 5…