The 1.2 m titanium fan casing requires 0.1 mm position on 96 flange holes and 0.05 mm coaxiality on combined datums. Mandrel-and-surface-plate setups took 16 hours per part and covered only a quarter of the holes.
Solution: a Helios-N CMM with 1500 mm travel and a 5-axis scanning head, scanning all flange holes, spigots and coaxial datums at 2400 points per part, with dual-sensor temperature compensation for titanium casing and granite table.
Results: inspection time fell to 3.5 hours with all 96 holes measured, and coaxiality was quantified across full sections for the first time at a stable 0.031-0.044 mm. First-match success at the engine customer rose from 88% to 99%, and inspection manpower was cut by two thirds.




