HOTNew energy & battery materials
电池壳体、极片、结构件与轻量化材料的尺寸与力学评价。
Sản phẩm
HOT
HOT
HOT
HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 100KN / 300KN / 600KN / 1000KN
- 5-100KN / 12-300KN / 50-600KN / 50-1000KN
HOTDự án tiêu biểu

FAI khung điện thoại: từ 90 xuống 12 phút
YRVMS4030CNC + telecentric hai phía đo 142 kích thước trong một chương trình, …

Kiểm tra mẫu và xu hướng mài mòn khuôn khi dập tốc độ cao
Lấy 5 chi tiết mỗi 2 giờ, bảng CPK trực tuyến giúp bảo dưỡng khuôn theo tình t…

Coplanarity of 32 automotive connector terminals in a single pass
YRVMS2515F with bi-telecentric optics and programmable ring light measures all…

In-line 100% inspection of shielding cans at 0.8 s per part
YR-MV1080 dedicated vision with rotary feeding inspects at 0.8 s per part with…

Non-contact needle dimension inspection with batch archiving
YRVMS2010E measures needle OD, ID, bevel angle and chamfer on 30 pieces in ten…

Tự động hoá thử kéo và tải nêm bu lông cấp 10.9
WAW-600C + extensometer tự động và đồ gá chuyên dụng: 4 phút/mẫu, năng suất từ…

Thử cắt và kéo chữ thập mối hàn điểm
Đồ gá chuyên dụng trên khung 500 kN đánh giá đường kính nhân hàn và kiểu phá h…

Proof load and wedge testing of M30 high-strength bolts
WAW-1000C with dedicated bolt fixtures and automatic rate control runs four mi…

Combined tensile and bend testing of HRB400 rebar
WEW-1000D with ribbed grips and a bend attachment cuts a tensile-plus-bend set…

Tensile modulus of CFRP laminates with a video extensometer
WDS-100G with a video extensometer cuts modulus scatter from ±6% to ±1.8% and …

Đo kết hợp Ra và biên dạng trục cán
CX-3/160 đo Ra và biên dạng trong một lần gá: từ 35 xuống 12 phút.

Liên hệ đường cong Rmr lỗ khối van với mài mòn
Đo CX-3/160 theo ISO 4287 cho thấy mài mòn sớm do chiều dài tựa không đủ ở vùn…

Combined Ra and Rmr evaluation solves an out-of-spec leakage problem
CX-3/100 showed Ra within spec but Rmr only 42%, indicating an insufficient pl…

Bore roundness, cylindricity and waviness diagnose oil consumption
Y9025C measured three sections and ran a waviness spectrum, identifying sixth-…

Waviness and Ra control on mechanical seal faces
XZ-230 revealed Ra of 0.08 µm passing while waviness of 0.4 µm failed; after l…

Đo hình dạng rãnh và độ cao gợn lá thép rotor
YR4030CNC-T đo 24 rãnh và gợn trong 100 giây.

Đo gradient độ cứng trục tôi cảm ứng
HVS-5Z đo lớp tôi cảm ứng theo GB/T 5617, HV5, sâu 2,1 mm.
