
Brinell hardness and gradients in ductile-iron castings
HBRVS-187.5 with HBW 2.5/187.5 measures six points per casting in eight minute…
Field results by industry, with cycle time, yield and cost impact

HBRVS-187.5 with HBW 2.5/187.5 measures six points per casting in eight minute…

HRC-45M at 15N reduces indent depth from 80 to 18 µm, leaving thin walls undis…

HRC-150SMJ with direct MES upload measures 18 seconds per part, storing data a…

HVS-1000Z micro-Vickers at 0.1 kgf maps the gradient, turning nitrided case as…

The HMAS-HT1200 measured 1100 °C in vacuum with clear indentations, ±4 °C unif…

MVSD-1000AEZ fully automatic micro-Vickers maps carbonitrided case depth to GB…

HVS-5Z digital Vickers maps the induction-hardened case of EV shafts to GB/T 5…

HRS-150M digital Rockwell tests GCr15 rings to GB/T 230.1 with 98.07 N prelimi…

HMAS-D1000SMZ automatic microhardness tester measures TiAlN coatings at HV0.05…

HBRVS-187.5MV universal tester does HRC sampling and HBW re-checks of H13 die …

HVS-1000M micro-Vickers with a motorised stage maps a 20×10 HV0.3 array across…

HVS-30Z digital Vickers re-verifies carbide inserts at HV30 to GB/T 4340.1, 29…

MVSD-1000AE automatic micro-Vickers measures hard-chrome layers at HV0.1 on cr…

HBS-3000MV digital Brinell tester with reference blocks and a standard measuri…

HVS-1000Z digital micro-Vickers tests 0.15 mm BeCu springs at HV0.2 on a vacuu…

W-B75 clamp-type Webster tester samples C194 copper strip hardness in line in …

HRS-150F motorised Rockwell with a V-locating fixture tests valve-seat cone ha…