
Sintering window of WC-Co defined by hardness at 1000 °C
Hardness at 1000 °C on HMAS-HT900CM replaces eight high-temperature bend runs …
Field results by industry, with cycle time, yield and cost impact

Hardness at 1000 °C on HMAS-HT900CM replaces eight high-temperature bend runs …

IMAS-HT700CM records 2-hour constant-load creep compliance with 12 points per …

HMAS-HT1300CM measures a three-point hardness gradient across ceramic top coat…

IMAS-HT1300CM logged 72-hour force-displacement curves and separated secondary…

The HMAS-UHT1700CM indented the ceramic top coat in-situ at 1600 °C through th…

IMAS-HT1500CM mapped in-situ hardness on 5 sections of a DD6 SX blade at 1100℃…

HMAS-HT900CM enabled in-house 800℃ hardness sampling of 690TT tubes per ASTM E…

HMAS-HT1300CM screened 12 WC-Co compositions at 1000℃ in one day, replacing tw…

IMAS-UHT1700CM performed 1600℃ in-situ indentation on C/C brake blanks; same-t…

HMAS-HT700CM samples 5 GH4169 bolts per heat lot at 650℃ per GB/T 4340.1; hard…

IMAS-HT900CM compared 900℃ microhardness maps of as-built vs HIPed GH3536, con…

HMAS-HT600 measured irradiated SA508-3 at 500℃ inside a hot cell, tracking the…

HMAS-HT1200 served as the pilot instrument in a 6-lab 1200℃ Vickers comparison…

HMAS-HT800 grades HSS work rolls by 600℃ red hardness per GB/T 4340.1 instead …

IMAS-HT700CM applied 50 gf micro-indents on AlTiN coatings at 800℃; higher Al …