HOTMicroscopes · 100 機種
HOT
HOT
HOT

MMAS-5 Polarizing Microscope (正置偏光)
Polarizing Microscope · 正置偏光
- 物镜长距平场消色差物镜(无盖玻片) PL 5X/0.12
- 放大倍数50~600X

MMAS-6 Metallurgical Microscope (正置透反)
Metallurgical Microscope · 正置透反
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~600X

MMAS-8 Metallurgical Microscope (正置透反)
Metallurgical Microscope · 正置透反
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~600X

MMAS-9 Polarizing Microscope (正置偏光)
Polarizing Microscope · 正置偏光
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~800X

MMAS-12 Polarizing Microscope (正置偏光)
Polarizing Microscope · 正置偏光
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~800X

MMAS-15 Metallurgical Microscope (无限远)
Metallurgical Microscope · 无限远
- 物镜无限远平场消色差物镜PL 5X/0.12,工作距离:26.1mm
- 放大倍数50~800X

MMAS-16 Polarizing Microscope (正置偏光)
Polarizing Microscope · 正置偏光
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~500X

MMAS-17 Metallurgical Microscope (正置透反)
Metallurgical Microscope · 正置透反
- 物镜长距平场消色差物镜(无盖玻片)PL 5X/0.12
- 放大倍数50~500X

MMAS-18 Metallurgical Microscope (无限远)
Metallurgical Microscope · 无限远
- 物镜(明场)无限远平场消色差物镜PL 5X/0.12,工作距离:26.1mm
- 放大倍数50~600X

MMAS-19 Metallurgical Microscope (微分干涉)
Metallurgical Microscope · 微分干涉
- 物镜(长距)无限远平场消色差物镜LMPlan5X/0.12DIC,工作距离:15mm
- 放大倍数50~400X

MMAS-20 Polarizing Microscope (倒置偏光)
Polarizing Microscope · 倒置偏光
- 物镜无限远平场消色差物镜PLL10X/0.25,工作距离:5mm
- 放大倍数100~1000X


MMAS-22 Metallurgical Microscope (明暗场)
Metallurgical Microscope · 明暗场
- 目镜大视野WF10X(视场数Φ22mm)
- PLL5X/0.12BD,工作距离8.05mm

MMAS-23 Metallurgical Microscope (微分干涉)
Metallurgical Microscope · 微分干涉
- 目镜大视野WF10X(视场数Φ22mm)
- 目镜筒三目镜30度倾斜(瞳距调节53~75)

MMAS-24 Metallurgical Microscope (微分干涉)
Metallurgical Microscope · 微分干涉
- 目镜大视野无色差SWF10X(视场数Φ22mm)
- PLL50X/0.70,工作距离3.68mm

MMAS-25 Metallurgical Microscope (微分干涉)
Metallurgical Microscope · 微分干涉
- 目镜大视野无色差SWF10X(视场数Φ22mm)
- PLL50X/0.70BD,工作距离2.5mm

MMAS-26 Metallurgical Microscope (明暗场)
Metallurgical Microscope · 明暗场
- 目镜大视野WF10X(视场数Φ22mm)
- PLL5X/0.12BD,工作距离8.05mm

MMAS-27 Metallurgical Microscope (明暗场)
Metallurgical Microscope · 明暗场
- 物镜(明暗场)无限远平场消色差物镜PLL 5X/0.12BD,工作距离:8.05mm
- 放大倍数50~600X

MMAS-28 Metallurgical Microscope (明暗场)
Metallurgical Microscope · 明暗场
- 目镜大视野WF10X(视场数Φ22mm)
- PLL5X/0.12BD,工作距离8.05mm

MMAS-29 Metallurgical Microscope (微分干涉)
Metallurgical Microscope · 微分干涉
- 目镜大视野无色差SWF10X(视场数Φ22mm)
- PLL50X/0.70,工作距离3068mm



AMM-8ST Metallurgical Microscope
Metallurgical Microscope
- 大型研发倒置卧式金相显微镜大型研发数码倒置卧式金相显微镜 / 大型研发视频图像倒置卧式金相显微镜 / 大型研发图像处理倒置卧式金相显微镜 / 大型研发数据处理倒置卧式金相显微镜
- 1、目镜筒卧式三目镜筒、双目、45度倾斜 瞳距55-75mm

AMM-17 Metallurgical Microscope
Metallurgical Microscope
- 正置明暗视场透反射金相显微镜数码正置明暗视场透反射金相显微 / 视频图像正置明暗视场透反射金相显微镜 / 图像处理正置明暗视场透反射金相显微镜 / 数据处理正置明暗视场透反射金相显微镜
- 1、目镜标配:大视野 WF10X(视场数Φ22mm)

AMM-200 Metallurgical Microscope
Metallurgical Microscope
- 三目正置金相显微镜数码三目正置金相显微镜 / 视频图像三目正置金相显微镜 / 图像处理三目正置金相显微镜 / 数据处理三目正置金相显微镜
- 1、目镜WF10X(直径18mm)、WF16X(直径11mm)























BPAS-360 Metallurgical Microscope
Metallurgical Microscope
- 变倍范围连续变倍7X~45X(可扩展到50X)
- 工作距离95mm(可扩展至115mm);大视场广角目镜WF10×/23mm

BPAS-240 Metallurgical Microscope
Metallurgical Microscope
- 变倍范围连续变倍7X~45X(可扩展到50X)
- 工作距离95mm(可扩展至115mm);大视场广角目镜WF10×/23mm

BPAS-120 Metallurgical Microscope
Metallurgical Microscope
- 变倍范围连续变倍7X~45X(可扩展到50X)
- 工作距离95mm(可扩展至115mm);大视场广角目镜WF10×/23mm














BI-16 Biological Microscope (相衬、无限远、示教)
Biological Microscope · 相衬、无限远、示教
- 放大倍数40X~1600X
- 目镜大视野WF10X(Φ18mm),大视野WF16X(Φ11mm)

BI-17 Biological Microscope (相衬、无限远、示教)
Biological Microscope · 相衬、无限远、示教
- 放大倍数40X~1000X
- 目镜大视野WF10X(Φ18mm)

BI-18 Biological Microscope (相衬、无限远、示教)
Biological Microscope · 相衬、无限远、示教
- 放大倍数40X~1000X
- 目镜大视野WF10X(焦距25mm,视场Φ18mm)

BI-19 Biological Microscope (相衬、无限远、示教)
Biological Microscope · 相衬、无限远、示教
- 放大倍数40X~1000X
- 目镜大视野WF10X(Φ18mm)

BI-20 Biological Microscope (相衬、无限远、示教)
Biological Microscope · 相衬、无限远、示教
- 放大倍数40X~1000X
- 目镜大视野WF10X(焦距25m,视场Φ18mm)



























PM-11 Polarizing Microscope (透、反射)
Polarizing Microscope · 透、反射
- 光学放大倍数40~600X、50~600X
- 目镜大视野WF10X(Φ18mm)、分划目镜10X (Φ18mm),0.10mm/格;PM-11A无应力平场消色差物镜(盖玻片0.17mm)PL:4X/0.;10X/0.;40X/0.65(弹簧)、60X/0.85(弹簧)

PM-12 Polarizing Microscope (透射)
Polarizing Microscope · 透射
- 光学放大倍数40~1000X、40~600X
- 目镜大视野WF10X(Φ18mm)、分划目镜10X (Φ18mm),0.10mm/格;PM-12A无应力平场消色差物镜(盖玻片0.17mm)PL/POL:4X/0.10\17.94工作距离、10X/0.25\8.
測定原理
Microscopes
The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.
- Bright field for routine microstructure, inclusions and decarburised layers.
- Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
- Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
- DIC converts tiny height differences into contrast, ideal for polished, unetched samples.
Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.
Process animation
Microscopes
- Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
- Illumination and focus: select BF/DF/POL/DIC and focus.
- Image capture: trinocular port, 1× camera adapter, white balance.
- Scale calibration: calibrate µm per pixel with a stage micrometer.
- Measurement: grain size, case depth, coating thickness, inclusion rating.
Calculation & formulas
Microscopes
1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.
2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.
3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.
4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).
5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.
規格
Microscopes
| Standard | Title | Scope |
|---|---|---|
| GB/T 13298-2015 | Metallic materials — examination of microstructure | Microstructure rating |
| GB/T 6394-2017 | Determination of average grain size | Grain size |
| ASTM E3-11 | Guide for metallographic specimen preparation | Preparation |
| ASTM E112 | Determining average grain size | Grain size |
| ISO 643 | Steels — micrographic determination of grain size | Grain size |
Export projects often require dual GB and ASTM reports; the software ships both rating charts.
選定ガイド
Microscopes
1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.
2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.
3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.
4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.
5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.
6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.
| Series | Type | Typical task | Recommended setup |
|---|---|---|---|
| HX-4A / HX-4B | Upright metallurgical | Routine structure, case depth | 5×/10×/40× + 5 MP camera |
| HX-G2A / G2B | Inverted | Batch samples, no re-mounting | Brightfield + simple polariser |
| HX-G3A | Trinocular inverted | Case depth, rating, reports | Camera + analysis software |
| HX-G4C / G5A | Research inverted | Darkfield/polarised/DIC | Semi-apochromat + motorised stage |
| HX-ZG7 / XSZ-146 | Stereo | Fracture, solder, low-mag locating | Zoom + ring light |
Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.
試験方法
Microscopes
Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.
Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.
Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.
Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.
Industry applications
Microscopes
- Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
- Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
- Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
- Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
- Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
- Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
- Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
- Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.
導入事例

Porosity and lack-of-fusion quantification in SLM titanium parts
HX-G4C with image analysis reports 0.08% porosity in 15 minutes to ASTM F3318,…

Penetration and intermetallic thickness in stainless-to-carbon steel joints
HX-G3A with measurement software reduces penetration, HAZ width and intermetal…

Automated inclusion rating of bearing steel to GB/T 10561 method A
HX-G5A with scanning software rates 200 fields in 12 minutes, matching three h…

Non-metallic inclusion rating to GB/T 10561
Combined dark-field and polarised imaging for A/B/C/D/DS inclusions raised rat…

Case depth and martensite rating for carburised gears
With the HX-G3A inverted microscope and analysis software, sample preparation …

Metallographic nodularity rating of ductile iron
MMAS-4 rates QT450-10 nodularity per GB/T 9441 at the furnace in 15 minutes, r…
Price and lead time for this model
技術者が 1 営業日以内に選定案・検査基準・納期をご提案します。
