HOT
XSD-100 · 2026-11-17 · +86 21 5748 2007
XSD-100 Biological Microscope
Biological Microscope
By submitting you agree to our privacy policy.
製品概要
XSD-100三目倒置生物显微镜配置大视野目镜,长工作距离平场消色差物镜、长工作距离聚光镜,同时配有相衬装置,可以观察在培养皿和培养瓶中未经染色的透明活体。该仪器特别适用于对活体细胞和组织、流质、沉淀物等进行显微研究,可供科研、高校、医疗、防疫和农牧等部门使用。
二、 XSD-100三目倒置生物显微镜性能特点:
1、 配置大视野目镜与长距平场消色差物镜,视场大而且清晰
2、配置相衬装置,包括长距相衬聚光镜,相衬物镜,对中望远镜
3、粗微动同轴调焦机构,粗动松紧可调,带锁紧和限位装置,微动格值: 2μm
4、 6V 20W卤素灯照明,亮度可调
三、 XSD-100三目倒置生物显微镜性能特点:
技术参数
目镜
大视野 WF10X(直径20mm)
选购:WF16X(直径11mm)、分划10X(直径20mm),格值0.1mm/格
物镜
长距平场消色差物镜 PL L 10X/0.25
长距平场消色差物镜 PL L 25X/0.40
长距平场消色差物镜 PL L 40X/0.60
长距平场消色差相衬物镜 PL L 10X/0.25 PHP
选配:插板式相衬装置
物镜:长距平场消色差相衬物镜 PL L 25X/0.40 PHP,PL L 40X/0.60 PHP
插板式相衬环板:25X、40X
选配:拉板式相衬装置
物镜: 长距平场消色差相衬物镜 PL L 10X/0.25 PHP2、PL L 25X/0.40 PHP2、
PL L 40X/0.60 PHP2
拉板式相衬环板: 10X、25X、40X
聚光镜升降可调, NA.=0.4,工作距离:55mm
目镜筒
三目镜(倾斜30度,可100%通光摄影)
调焦机构
粗微动同轴调焦,粗动松紧可调,带锁紧和限位装置板,微动格值:2μm.
转换器
四孔(滚珠内定位)
选配:五孔(滚珠内定位)
载物台
双层机械移动式(尺寸200mmX152mm,移动范围:75mmX30mm)
标本架
适合放置直径72mm或77mmX33mm培养器皿
适合放置直径68mm培养器皿、磨砂玻璃
滤色片
蓝滤色片、绿滤色片
选配:黄滤色片
插板式相衬装置
对中望远镜
10X 插板式相衬环板
聚光镜升降可调, NA.=0.4,工作距离:30mm
光源
6V 20W卤素灯,亮度可调
XSD-100 Biological Microscope supplied by CHWES. 0 key specifications available on request.
仕様
* Generated by rule engine over the product database; for pre-selection only.
測定原理
The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.
- Bright field for routine microstructure, inclusions and decarburised layers.
- Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
- Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
- DIC converts tiny height differences into contrast, ideal for polished, unetched samples.
Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.
Process animation
- Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
- Illumination and focus: select BF/DF/POL/DIC and focus.
- Image capture: trinocular port, 1× camera adapter, white balance.
- Scale calibration: calibrate µm per pixel with a stage micrometer.
- Measurement: grain size, case depth, coating thickness, inclusion rating.
Calculation & formulas
1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.
2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.
3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.
4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).
5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.
規格
| Standard | Title | Scope |
|---|---|---|
| GB/T 13298-2015 | Metallic materials — examination of microstructure | Microstructure rating |
| GB/T 6394-2017 | Determination of average grain size | Grain size |
| ASTM E3-11 | Guide for metallographic specimen preparation | Preparation |
| ASTM E112 | Determining average grain size | Grain size |
| ISO 643 | Steels — micrographic determination of grain size | Grain size |
Export projects often require dual GB and ASTM reports; the software ships both rating charts.
選定ガイド
1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.
2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.
3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.
4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.
5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.
6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.
| Series | Type | Typical task | Recommended setup |
|---|---|---|---|
| HX-4A / HX-4B | Upright metallurgical | Routine structure, case depth | 5×/10×/40× + 5 MP camera |
| HX-G2A / G2B | Inverted | Batch samples, no re-mounting | Brightfield + simple polariser |
| HX-G3A | Trinocular inverted | Case depth, rating, reports | Camera + analysis software |
| HX-G4C / G5A | Research inverted | Darkfield/polarised/DIC | Semi-apochromat + motorised stage |
| HX-ZG7 / XSZ-146 | Stereo | Fracture, solder, low-mag locating | Zoom + ring light |
Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.
試験方法
Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.
Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.
Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.
Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.
Industry applications
- Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
- Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
- Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
- Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
- Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
- Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
- Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
- Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.


