Авиапроизводство2023

КИМ Helios-N для авиакартеров диаметром 1,2 м

КИМ Helios-N измеряет картера диаметром 1,2 м с 5-осевым сканированием 2400 точек; контроль сокращен с 16 ч до 3,5 ч.

Компания
Завод авиационных картеров, СЗ. Китай
Адрес
Сиань, Шэньси
КИМ Helios-N для авиакартеров диаметром 1,2 м
3.5 hВремя контроля
99%Успешность сопряжения

The 1.2 m titanium fan casing requires 0.1 mm position on 96 flange holes and 0.05 mm coaxiality on combined datums. Mandrel-and-surface-plate setups took 16 hours per part and covered only a quarter of the holes.

Solution: a Helios-N CMM with 1500 mm travel and a 5-axis scanning head, scanning all flange holes, spigots and coaxial datums at 2400 points per part, with dual-sensor temperature compensation for titanium casing and granite table.

Results: inspection time fell to 3.5 hours with all 96 holes measured, and coaxiality was quantified across full sections for the first time at a stable 0.031-0.044 mm. First-match success at the engine customer rose from 88% to 99%, and inspection manpower was cut by two thirds.

⇄0СравнениеСравнение характеристик