Aircraft manufacturing2023

Helios-N CMM for 1.2 m Aero Engine Casings

Helios-N CMM measures flange hole positions and coaxiality on 1.2 m titanium casings with 5-axis scanning at 2400 points per part, replacing mandrel-and-plate setups; inspection fell from 16 h to 3.5 h.

会社名
An aero engine casing maker, NW. China
所在地
Xi’an, Shaanxi
Helios-N CMM for 1.2 m Aero Engine Casings
3.5 hInspection time
99%First-match rate

The 1.2 m titanium fan casing requires 0.1 mm position on 96 flange holes and 0.05 mm coaxiality on combined datums. Mandrel-and-surface-plate setups took 16 hours per part and covered only a quarter of the holes.

Solution: a Helios-N CMM with 1500 mm travel and a 5-axis scanning head, scanning all flange holes, spigots and coaxial datums at 2400 points per part, with dual-sensor temperature compensation for titanium casing and granite table.

Results: inspection time fell to 3.5 hours with all 96 holes measured, and coaxiality was quantified across full sections for the first time at a stable 0.031-0.044 mm. First-match success at the engine customer rose from 88% to 99%, and inspection manpower was cut by two thirds.

⇄0比較仕様比較