
Minimum-Zone Straightness Evaluation of Guideways: How Much Do the End-Point and Minimum-Zone Methods Differ
On the same broken line, end-point and minimum-zone straightness can dif…
시험 방법 · 측정 원리

On the same broken line, end-point and minimum-zone straightness can dif…

Optical polygons are angle standards; two autocollimators in permutation…

1 arc-second is 4.85 μrad, i.e. about 0.97 μm height difference on a 200…

Coatings of ~20 μm demand loads of HV0.05 or less, indent spacing of at …

Vickers indentation induces radial cracks; the Anstis equation back-calc…

Titanium alloys absorb oxygen rapidly above 800 °C; reaching 10⁻² Pa is …

MoSi₂ works in oxidizing atmospheres up to 1700 °C; graphite exceeds 200…

Under constant load the indent keeps deepening; fitting the power law ε̇…
Impure atmosphere and a cold indenter can shift hardness by more than 10…
It is not one certified circle: length error, probing error and multi-di…
Differences between manual and software case-depth results usually come …