Automotive transmission2025

MARSURF-XC2 for Ground Gear Flank Roughness

MARSURF-XC2 with a small-bore stylus reaches module-2 tooth spaces, grading Ra/Rz/RSm per ISO 4288; flank Ra held at 0.19 um and gear whine complaints fell 70%.

회사명
A transmission gear plant, S. China
주소
Guangzhou, Guangdong
MARSURF-XC2 for Ground Gear Flank Roughness
0.19 μmFlank Ra
0.33%Whine complaint rate

After grinding, flank roughness was spot-checked with a portable tester whose stylus could not enter tooth spaces below module 2, so measurements were taken on tip lands instead. True flank condition was out of control and gearbox whine complaints ran at 1.1%.

Solution: a MARSURF-XC2 roughness station with a small-bore stylus and a tooth-locating fixture, tracing along the flank line and grading Ra, Rz and RSm per ISO 4288 with 0.8 mm sampling and 4 mm evaluation lengths; three gears per batch, four flanks each.

Results: the true flank Ra of 0.19 um (versus 0.35 um proxy readings) is now held stable with RSm within 0.06 mm. The wheel dressing interval was optimized from 8 h to 6.5 h, whine complaints fell to 0.33%, and annual warranty cost dropped by about 1.2 million yuan.

⇄0비교사양 비교