HOTHMAS-D5/10/30/50SZA Vickers Hardness Tester
Vickers Hardness Tester
- 测量分析系统HMAS‑硬度测量分析系统
- 光学成像系统维氏硬度大三通光学成像系统
HVI-5/10/20/30/40/50/100Z · 2026-11-17 · +86 21 5748 2007
Vickers Hardness Tester
By submitting you agree to our privacy policy.
HVI-5/10/20/30/40/50/100Z
自动转塔传感器数显维氏硬度计,该机器造型新颖,具有良好的可靠性,可操作性和直观性,是采用精密机械技术和光电技术的新型维氏和努普硬度测试仪器.该机采用计算机软件编程,光学测量系统.通过软键输入,可选择维氏和努氏硬度的测量、能调节测量光源的强弱,能选择保荷时间,在数码管显示屏上能显示试验方法、试验力,通过面板输入测量压痕对角线长度、屏幕直接读出硬度值,简便了查表的繁琐,使用方便,测量精度高.该维氏硬度计优质的测量装换和测微目镜一次测量读数结构,使硬度测量更加正确和方便.该维氏硬度计可选配摄影装置,能对所测压痕和材料金相组织进行拍摄,并且进行数据处理和分析,大大提高了工作效率。
传感器闭环控制开机即用,电机加载无需安装砝码调试。
标准机12档和16档力(非标定制);也可按需定做更多及不同的试验力机型。
触摸屏控制系统,操作方便快捷。
硬度值自动储存,自动计算平均值、最大值、最小值、极差值。
技术参数:
型号
HVI-5Z;HVI-10Z;HVI-20Z;HVI-30Z;HVI-40Z;HVI-50Z;HVI-100Z
转塔方式
自动转塔
加载机构
高精度传感器加载
升降机构
梯形丝杆
HVI‑5Z试验力
(5Kg) :0.5kgf、1kgf、1.5kgf、2kgf、2.5kgf、3kgf、3.5kgf、4kgf、4.5kgf、5kgf;
HVI‑10Z试验力
(10Kg) :0.5kgf、1kgf、1.5kgf、2kgf、2.5kgf、3kgf、3.5kgf、4kgf、5kgf、8kgf、10kgf;
HVI‑20Z试验力
(20Kg) :1kgf、2kgf、2.5kgf、3kgf、4kgf、4.5kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf;
HVI‑30Z试验力
(30Kg) :1kgf、2kgf、2.5kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf;
HVI‑40Z试验力
(40Kg)
:1kgf、2kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、18kgf、20kgf、22kgf、25kgf、28kgf、30kgf、35kgf、40kgf;
HVI‑50Z试验力
(50Kg) :2kgf、2.5kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf、50kgf;
HVI‑100Z试验力
(100Kg) :2kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf、50kgf、100kgf
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
试验力加载
全自动(加载 / 保荷 / 卸载)
执行国家标准
GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
理论硬度测量范围
8 - 3000HV
目镜倍率
10X(数显目镜)
HVI‑5Z;HVI‑10Z物镜倍率
(5Kg、10Kg) :10X(观察)20X(测量);
HVI‑20Z;HVI‑30Z;HVI‑40Z;HVI‑50Z;HVI‑100Z物镜倍率
(20Kg、30Kg、40Kg、50Kg、100Kg) : 10X(观察、测量)
HVI‑5;HVI‑10总放大倍数
(5Kg、10Kg) :100X(观察)200X(测量)
HVI‑20;HVI‑30;HVI‑40;HVI‑50;HVI‑100总放大倍数
(20Kg、30Kg、40Kg、50Kg、100Kg) : 100X(观察、测量)
最小检测单位
0.06μm(10X物镜),0.03μm(20X物镜)
试验力保荷时间
0 - 60 秒,最小变动量 1 秒
试件最大高度
245mm
压头中心到内壁距离
138mm
电源电压
AC 220V/50Hz
外形尺寸
570*220*680mm(长*宽*高)
净重
46.0kg
毛重
61.0kg
HVI-5/10/20/30/40/50/100Z Vickers Hardness Tester supplied by CHWES. 25 key specifications available on request.
| 转塔方式 | 自动转塔 |
|---|---|
| 加载机构 | 高精度传感器加载 |
| 升降机构 | 梯形丝杆 |
| HVI‑5Z试验力 | (5Kg) :0.5kgf、1kgf、1.5kgf、2kgf、2.5kgf、3kgf、3.5kgf、4kgf、4.5kgf、5kgf; |
| HVI‑10Z试验力 | (10Kg) :0.5kgf、1kgf、1.5kgf、2kgf、2.5kgf、3kgf、3.5kgf、4kgf、5kgf、8kgf、10kgf; |
| HVI‑20Z试验力 | (20Kg) :1kgf、2kgf、2.5kgf、3kgf、4kgf、4.5kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf; |
| HVI‑30Z试验力 | (30Kg) :1kgf、2kgf、2.5kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf; |
| HVI‑40Z试验力 | (40Kg) :1kgf、2kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、18kgf、20kgf、22kgf、25kgf、28kgf、30kgf、35kgf、40kgf; |
| HVI‑50Z试验力 | (50Kg) :2kgf、2.5kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf、50kgf; |
| HVI‑100Z试验力 | (100Kg) :2kgf、3kgf、5kgf、8kgf、10kgf、12kgf、15kgf、20kgf、25kgf、30kgf、50kgf、100kgf |
| 转换标尺 | HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T |
| 试验力加载 | 全自动(加载 / 保荷 / 卸载) |
| 执行国家标准 | GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准 |
| 理论硬度测量范围 | 8 - 3000HV |
| 目镜倍率 | 10X(数显目镜) |
| HVI‑5Z;HVI‑10Z物镜倍率 | (5Kg、10Kg) :10X(观察)20X(测量); |
| HVI‑5;HVI‑10总放大倍数 | (5Kg、10Kg) :100X(观察)200X(测量) |
| 最小检测单位 | 0.06μm(10X物镜),0.03μm(20X物镜) |
| 试验力保荷时间 | 0 - 60 秒,最小变动量 1 秒 |
| 试件最大高度 | 245mm |
| 压头中心到内壁距离 | 138mm |
| 电源电压 | AC 220V/50Hz |
| 外形尺寸 | 570*220*680mm(长*宽*高) |
| 净重 | 46.0kg |
| 毛重 | 61.0kg |
* Generated by rule engine over the product database; for pre-selection only.
Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.
Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.
1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.
2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.
3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.
4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.
5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.
| Standard | Title | Scope |
|---|---|---|
| GB/T 4340.1-2009 | Vickers hardness test — test method | Vickers |
| GB/T 230.1-2018 | Rockwell hardness test | Rockwell |
| GB/T 231.1-2018 | Brinell hardness test | Brinell |
| ISO 6507-1 | Vickers hardness test | Export |
| ASTM E92 | Vickers hardness of metallic materials | Americas |
| GB/T 17394.1-2014 | Leeb hardness test | Portable |
Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.
1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.
2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.
3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.
4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.
5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.
6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.
| Model | Principle | Range | Typical use |
|---|---|---|---|
| HRC-150SMJ | Rockwell, motorised digital | HRA/HRB/HRC | Batch sampling in heat treatment |
| HRC-150SM / HRC-150M | Rockwell | HRA/HRB/HRC | Incoming and in-process checks |
| HRC-45M | Superficial Rockwell | 15N/30N/45N | Sheet, plating, case layers |
| HRS-150M / XHRS-150M | Digital Rockwell | HRA/HRB/HRC | Lines needing data upload |
| HBRVS-187.5 | Brinell-Vickers-Rockwell | HBW/HRA/HRB/HRC/HV | Mixed low-volume production |
Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.
Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.
Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.
Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.
Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.
Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.