HOTHMAS-D5/10/30/50SZA Vickers Hardness Tester
Vickers Hardness Tester
- 测量分析系统HMAS‑硬度测量分析系统
- 光学成像系统维氏硬度大三通光学成像系统
HMAS-D5103050MZ · 2026-11-17 · +86 21 5748 2007
Vickers Hardness Tester · M
By submitting you agree to our privacy policy.
HMAS-D5/10/30/50(M)(Z)维氏硬度测量分析系统是公司结合光学、机械、电器、软件和硬件等多方面技术,自主设计、研发、并制造的新一代高新技术产品。本产品采用精密的机械结构,提高了机器本身的机械稳定性能。并在光学系统与光源上采用了独特的设计、精密的设计组合,使压痕的成像效果更加的清晰。另采用先进的软件技术,配备公司自主设计、开发的(RQHMAS-D
显微硬度测量分析系统)。经过HMAS-D
显微硬度测量分析系统进行图形图像处理技术,对硬度的测量和分析更加方便快捷。使机器进一步进入了自动化控制领域.更广泛的适应于各种材料的硬度检测,碳化层和淬火硬化层的深度及梯度的硬度测试,是科研机构、企业及质检部门行研究和检测的理想的硬度测试仪器。
性能特点:
1、双向实时通讯,毫秒级响应;断线瞬间自检并弹窗提示。
2、智能力值:加载档位自动识别,力值切换一键到位。
3、打压痕:加载 - 保荷 - 卸载全自动闭环控制,重复精度≤ 0.1 %。
4、模块化 UI:面板可拖拽、工作区自定义,常用功能“零点击”直达。
5、5 种中心线 + 颜色 / 线宽 / 字号个性化配置,压痕中心定位一目了然。
6、移动辅助:独有网格距离 + 路径规划,渗层测试移动步距直观可视。
7、13 种实时背景着色算法,不同材料成像始终锐利清晰。
8、多维度报表:集成基础信息、自定义字段、CPK 图表,内容与版式均可个性化。
9、压痕相册:每张压痕自动生成带二维码的“微报告”,扫码即可查看完整数据。
10、6 种硬度测量模式(手动 / 自动 / 批量)。
11、滚轮无极放大,切线定位精度达 0.1 μm。
12、同屏多压痕:快速聚类、高亮提示,数据 - 曲线 - 图谱三视图实时联动,可独立导出。
技术参数:
型号
HMAS-D5/10/30/50
HMAS-D5/10/30/50M
HMAS-D5/10/30/50Z
HMAS-D5/10/30/50MZ
测量分析系统
HMAS-D-显微硬度测量分析系统
光学成像系统
维氏硬度大三通光学成像系统
主机屏幕
LCD屏
触摸屏
LCD屏
触摸屏
转换塔方式
手动转塔
自动转塔
变荷装置机构
砝码加载
升降机构
精密梯形丝杆
试验力
(5Kg):0.2kgf, 0.3kgf, 0.5kgf, 1kgf, 3kgf, 5kgf
(10Kg):0.3kgf, 0.5kgf, 1kgf,
3kgf, 5kgf, 10kgf
(30Kg):1kgf, 3kgf, 5kgf, 10kgf, 20kgf, 30kgf
(50Kg):1kgf, 5kgf, 10kgf,
20kgf, 30kgf, 50kgf
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR5N、HR30N、HR45N、HR15T、HR30T、HR45T
试验力加载
全自动 (加载/保荷/卸载)
执行国家标准
GB/T4340 国家标准, ISO6507 质量认证, ASTM 标准
理论硬度测量范围
8-6000HV (可选更大范围)
硬度值测量方式
(双系统测量) 主机单独测量 / 电脑软件测量分析
目镜倍率
10X
物镜倍率
(5Kg、10Kg):10X (观察) 20X (测量) , (30Kg、50Kg):10X (观察、测量)
总放大倍数
(5Kg、10Kg):100X (观察) 200X (测量) , (30Kg、50Kg):100X (观察、测量) , 电脑大约
10X(375x)、20X(75x)
主机最小检测单位
1μm (10X物镜) , 0.5μm (20X物镜)
0.12μm (10X物镜) , 0.06μm (20X物镜)
1μm (10X物镜) , 0.5μm (20X物镜)
0.12μm (10X物镜) , 0.06μm (20X物镜)
试验力保荷时间
0-99秒, 最小变动量 1秒
0-60秒, 最小变动量 1秒
0-99秒, 最小变动量 1秒
0-60秒, 最小变动量 1秒
试件最大高度
235mm
压头中心到内壁距离
130mm
外形尺寸
220*570*680mm (长*宽*高)
净重
54.0kg
毛重
72.0kg
HMAS-D5103050MZ Vickers Hardness Tester (M) supplied by CHWES. 22 key specifications available on request.
| 测量分析系统 | HMAS-D-显微硬度测量分析系统 |
|---|---|
| 光学成像系统 | 维氏硬度大三通光学成像系统 |
| 主机屏幕 | LCD屏 / 触摸屏 / LCD屏 / 触摸屏 |
| 转换塔方式 | 手动转塔 / 自动转塔 |
| 变荷装置机构 | 砝码加载 |
| 升降机构 | 精密梯形丝杆 |
| 试验力 | (5Kg):0.2kgf, 0.3kgf, 0.5kgf, 1kgf, 3kgf, 5kgf(10Kg):0.3kgf, 0.5kgf, 1kgf, 3kgf, 5kgf, 10kgf(30Kg):1kgf, 3kgf, 5kgf, 10kgf, 20kgf, 30kgf(50Kg):1kgf, 5kgf, 10kgf, 20kgf, 30kgf, 50kgf |
| 转换标尺 | HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR5N、HR30N、HR45N、HR15T、HR30T、HR45T |
| 试验力加载 | 全自动 (加载/保荷/卸载) |
| 执行国家标准 | GB/T4340 国家标准, ISO6507 质量认证, ASTM 标准 |
| 理论硬度测量范围 | 8-6000HV (可选更大范围) |
| 硬度值测量方式 | (双系统测量) 主机单独测量 / 电脑软件测量分析 |
| 目镜倍率 | 10X |
| 物镜倍率 | (5Kg、10Kg):10X (观察) 20X (测量) , (30Kg、50Kg):10X (观察、测量) |
| 总放大倍数 | (5Kg、10Kg):100X (观察) 200X (测量) , (30Kg、50Kg):100X (观察、测量) , 电脑大约 10X(375x)、20X(75x) |
| 主机最小检测单位 | 1μm (10X物镜) , 0.5μm (20X物镜) / 0.12μm (10X物镜) , 0.06μm (20X物镜) / 1μm (10X物镜) , 0.5μm (20X物镜) / 0.12μm (10X物镜) , 0.06μm (20X物镜) |
| 试验力保荷时间 | 0-99秒, 最小变动量 1秒 / 0-60秒, 最小变动量 1秒 / 0-99秒, 最小变动量 1秒 / 0-60秒, 最小变动量 1秒 |
| 试件最大高度 | 235mm |
| 压头中心到内壁距离 | 130mm |
| 外形尺寸 | 220*570*680mm (长*宽*高) |
| 净重 | 54.0kg |
| 毛重 | 72.0kg |
* Generated by rule engine over the product database; for pre-selection only.
Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.
Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.
1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.
2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.
3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.
4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.
5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.
| Standard | Title | Scope |
|---|---|---|
| GB/T 4340.1-2009 | Vickers hardness test — test method | Vickers |
| GB/T 230.1-2018 | Rockwell hardness test | Rockwell |
| GB/T 231.1-2018 | Brinell hardness test | Brinell |
| ISO 6507-1 | Vickers hardness test | Export |
| ASTM E92 | Vickers hardness of metallic materials | Americas |
| GB/T 17394.1-2014 | Leeb hardness test | Portable |
Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.
1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.
2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.
3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.
4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.
5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.
6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.
| Model | Principle | Range | Typical use |
|---|---|---|---|
| HRC-150SMJ | Rockwell, motorised digital | HRA/HRB/HRC | Batch sampling in heat treatment |
| HRC-150SM / HRC-150M | Rockwell | HRA/HRB/HRC | Incoming and in-process checks |
| HRC-45M | Superficial Rockwell | 15N/30N/45N | Sheet, plating, case layers |
| HRS-150M / XHRS-150M | Digital Rockwell | HRA/HRB/HRC | Lines needing data upload |
| HBRVS-187.5 | Brinell-Vickers-Rockwell | HBW/HRA/HRB/HRC/HV | Mixed low-volume production |
Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.
Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.
Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.
Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.
Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.
Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.