HOTHMAS-D5/10/30/50SZA Vickers Hardness Tester
Vickers Hardness Tester
- 测量分析系统HMAS‑硬度测量分析系统
- 光学成像系统维氏硬度大三通光学成像系统
HMAS-D5Z · 2026-11-17 · +86 21 5748 2007
Vickers Hardness Tester
By submitting you agree to our privacy policy.
HMAS-D5Z/10Z/20Z/30Z/50Z维氏硬度测量分析系统是本公司推出的第六代光机电一体化的高新技术产品,该机器造型新颖,具有良好的可靠性,可操作性和直观性,是采用精密机械技术、光电技术、图形图像处理技术和材料硬度分析软件的新型维氏和努普硬度测试仪器。
性能特点:
1、外观新颖,采用微机控制自动转塔通过软件执行操作,进一步实现测量的智能化。
2、设备摈弃传统繁琐测量步骤,测量方法更简便
3、设备自带打印功能,可将相关测量参数打印并保存
4、设备能对被测材料进行拍摄并能对其组织进行分析和读取
5、可调节测量光源强弱,可预置试验力保持时间、并能切换维氏和努氏试验方法
适用范围:
热处理、碳化、淬火硬化层,表面覆层,钢,有色金属和微小及薄形零件等.配备努氏压头后能测定玻璃、陶瓷、玛瑙、人造宝石等较脆而又硬材料的努氏硬度.
技术参数:
型号
HMAS‑D5Z
测量分析系统
维氏硬度测量分析系统
光学成像系统
维氏硬度大三通光学成像系统
主机屏幕
LCD 屏
转塔方式
自动转塔
变荷装置机构
砝码加载
升降机构
精密梯形丝杆
HMAS‑D5Z试验力
(5Kg):0.2kgf、0.3kgf、0.5kgf、1kgf、3kgf、5kgf;
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
试验力加载
全自动(加载 / 保荷 / 卸载)
执行国家标准
GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
理论硬度测量范围
8 - 6000HV(可选更大范围)
硬度值测量方式
(双系统测量) 主机单独测量 / 电脑软件测量分析
目镜倍率
10X
HMAS‑D5/10物镜倍率
(5Kg、10Kg):10X(观察)20X(测量),
HMAS‑D30/50物镜倍率
(30Kg、50Kg):10X(观察、测量)
HMAS‑D5/10总放大倍数
(5Kg、10Kg):100X(观察)200X(测量)
HMAS‑D30/50总放大倍数
(30Kg、50Kg):100X(观察、测量), 电脑大约: 10X (375x)、20X (750x)
主机最小检测单位
1μm(10X 物镜), 0.5μm(20X 物镜)
试验力保荷时间
0 - 99 秒,最小变动量 1 秒
试件最大高度
235mm
压头中心到内壁距离
130mm
外形尺寸
220*570*680mm(长*宽*高)
净重
54.0kg
毛重
72.0kg
HMAS-D5Z Vickers Hardness Tester supplied by CHWES. 24 key specifications available on request.
| 测量分析系统 | 维氏硬度测量分析系统 |
|---|---|
| 光学成像系统 | 维氏硬度大三通光学成像系统 |
| 主机屏幕 | LCD 屏 |
| 转塔方式 | 自动转塔 |
| 变荷装置机构 | 砝码加载 |
| 升降机构 | 精密梯形丝杆 |
| HMAS‑D5Z试验力 | (5Kg):0.2kgf、0.3kgf、0.5kgf、1kgf、3kgf、5kgf; |
| 转换标尺 | HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T |
| 试验力加载 | 全自动(加载 / 保荷 / 卸载) |
| 执行国家标准 | GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准 |
| 理论硬度测量范围 | 8 - 6000HV(可选更大范围) |
| 硬度值测量方式 | (双系统测量) 主机单独测量 / 电脑软件测量分析 |
| 目镜倍率 | 10X |
| HMAS‑D5/10物镜倍率 | (5Kg、10Kg):10X(观察)20X(测量) |
| HMAS‑D30/50物镜倍率 | (30Kg、50Kg):10X(观察、测量) |
| HMAS‑D5/10总放大倍数 | (5Kg、10Kg):100X(观察)200X(测量) |
| HMAS‑D30/50总放大倍数 | (30Kg、50Kg):100X(观察、测量), 电脑大约: 10X (375x)、20X (750x) |
| 主机最小检测单位 | 1μm(10X 物镜), 0.5μm(20X 物镜) |
| 试验力保荷时间 | 0 - 99 秒,最小变动量 1 秒 |
| 试件最大高度 | 235mm |
| 压头中心到内壁距离 | 130mm |
| 外形尺寸 | 220*570*680mm(长*宽*高) |
| 净重 | 54.0kg |
| 毛重 | 72.0kg |
* Generated by rule engine over the product database; for pre-selection only.
Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.
Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.
1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.
2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.
3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.
4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.
5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.
| Standard | Title | Scope |
|---|---|---|
| GB/T 4340.1-2009 | Vickers hardness test — test method | Vickers |
| GB/T 230.1-2018 | Rockwell hardness test | Rockwell |
| GB/T 231.1-2018 | Brinell hardness test | Brinell |
| ISO 6507-1 | Vickers hardness test | Export |
| ASTM E92 | Vickers hardness of metallic materials | Americas |
| GB/T 17394.1-2014 | Leeb hardness test | Portable |
Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.
1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.
2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.
3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.
4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.
5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.
6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.
| Model | Principle | Range | Typical use |
|---|---|---|---|
| HRC-150SMJ | Rockwell, motorised digital | HRA/HRB/HRC | Batch sampling in heat treatment |
| HRC-150SM / HRC-150M | Rockwell | HRA/HRB/HRC | Incoming and in-process checks |
| HRC-45M | Superficial Rockwell | 15N/30N/45N | Sheet, plating, case layers |
| HRS-150M / XHRS-150M | Digital Rockwell | HRA/HRB/HRC | Lines needing data upload |
| HBRVS-187.5 | Brinell-Vickers-Rockwell | HBW/HRA/HRB/HRC/HV | Mixed low-volume production |
Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.
Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.
Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.
Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.
Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.
Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.