HOTHMAS-D5/10/30/50SZA Vickers Hardness Tester
Vickers Hardness Tester
- 测量分析系统HMAS‑硬度测量分析系统
- 光学成像系统维氏硬度大三通光学成像系统
HBS-62.5M · 2026-11-17 · +86 21 5748 2007
Brinell Hardness Tester
By submitting you agree to our privacy policy.
HBS-62.5M/MZ系列触摸屏数显小负荷布氏硬度计是光机电一体化的高新技术产品,具有良好的可靠性,可操作性,是小负荷部氏硬度计的前沿科技新产品。该机采用高精度力传感器闭环控制系统,电机施加压力无需砝码、试验力的加荷、保荷、卸荷采用自动切换,操作简便迅速。试验力更广、更正确;高倍率光学系统,压痕更清晰,便于测量,硬度测量更精确。
触摸式操作直观显示测试内容。通过触摸点击选择测试方法,一键式启动硬度测试无需提前人工施加初实验力、实验力值实时显示更加直观、确保力值的真实性。精确到克的实时力值显示是本机的优势之一。在大屏幕屏上实时显示试验方法、试验力,硬度值、试验力保持时间等。此设备提供了硬度测试数据自动储存,自动判断最大值、最小值、极差值、平均值。
布氏硬度试验主要用于铸铁、钢材、有色金属及软合金等材料的硬度测定,此外还可以用于硬质的塑料、电木等某些非金属材料硬度的测定。适用于工厂、车间、试验室、大专院校和科研机构。
结构特点:
全新的机身:
采用柔线型铸铝机身,使得机器整体美观轻便;
新的塔台机构:
在塔台上一次最多可以安装三个物镜,使得它更像一台显微镜,这样您就能够观察多种样品表面条件。(需要定制)
照明机构:
超长的灯源使用寿命。
全新大三通结构:
全新大三通光路系统,接近100%光吸收。
塔台切换机构:
塔台精确90度等分,弹性定位结构。使每次切换可准确定位于卡槽内。
先进的浮点计算方法:
全新浮点计算方法,使测试结果与理论结果更加接近一致。
可以扩展的自动功能:
选装自动载物台(特殊机型需定制)、选装计算机,硬度测量软件等多种配件,硬度计可以升级成多种不同程度的自动控制系统。
产品特点:
1、传感器闭环控制开机即用,电动加载,无需安装砝码调试;
2、本机布氏标尺10种试验标尺;
3、触摸屏控制系统、操作方便快捷;
4、硬度值自动储存,自动计算平均值、最大值、最小值、极差值;
5、力值实时显示;
技术参数:
型号
HBS‑62.5M
转塔方式
手动转塔
变荷装置机构
传感器闭环控制
升降机构
精密梯形丝杆
试验力
1、2.5、5、6.25、10、15.625、25、30、31.25、62.5KG
测量标尺
HBW1/1、HBW1/2.5、HBW1/5、HBW1/10、HBW1/30、HBW2.5/6.25、HBW2.5/15.625、HBW2.5/31.25、HBW2.5/62.5、HBW5/25、HBW5/62.5
换算标尺
14 种硬度标尺
试验力加载
自动(加载/保荷/卸载)
试验力选择方式
触摸屏
执行国家标准
GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
理论硬度测量范围
4‑650HBW
光亮度调节
1‑10 级可调,步进 1 级
硬度值显示方式
触摸屏
目镜
10X(数显目镜)
物镜倍率
5X(10X 选配)
总放大倍数
50X
读数方式
数显目镜按钮采集
计算方式
自动计算
最小检测单位
2μm
测微目镜移动方式
手动
测量数据采集方式
按键
测量结果计算方式
自动计算
试验力保荷时间
0‑60 秒,最小变动量 1 秒
试件最大高度
245mm
压头中心到内壁距离
138mm
电源电压
AC 220V/50Hz
机身厚度
8‑10mm
外形尺寸
570*220*680mm(长*宽*高)
净重
40.0kg
毛重
55.0kg
HBS-62.5M Brinell Hardness Tester supplied by CHWES. 29 key specifications available on request.
| 转塔方式 | 手动转塔 |
|---|---|
| 变荷装置机构 | 传感器闭环控制 |
| 升降机构 | 精密梯形丝杆 |
| 试验力 | 1、2.5、5、6.25、10、15.625、25、30、31.25、62.5KG |
| 测量标尺 | HBW1/1、HBW1/2.5、HBW1/5、HBW1/10、HBW1/30、HBW2.5/6.25、HBW2.5/15.625、HBW2.5/31.25、HBW2.5/62.5、HBW5/25、HBW5/62.5 |
| 换算标尺 | 14 种硬度标尺 |
| 试验力加载 | 自动(加载/保荷/卸载) |
| 试验力选择方式 | 触摸屏 |
| 执行国家标准 | GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准 |
| 理论硬度测量范围 | 4‑650HBW |
| 光亮度调节 | 1‑10 级可调,步进 1 级 |
| 硬度值显示方式 | 触摸屏 |
| 目镜 | 10X(数显目镜) |
| 物镜倍率 | 5X(10X 选配) |
| 总放大倍数 | 50X |
| 读数方式 | 数显目镜按钮采集 |
| 计算方式 | 自动计算 |
| 最小检测单位 | 2μm |
| 测微目镜移动方式 | 手动 |
| 测量数据采集方式 | 按键 |
| 测量结果计算方式 | 自动计算 |
| 试验力保荷时间 | 0‑60 秒,最小变动量 1 秒 |
| 试件最大高度 | 245mm |
| 压头中心到内壁距离 | 138mm |
| 电源电压 | AC 220V/50Hz |
| 机身厚度 | 8‑10mm |
| 外形尺寸 | 570*220*680mm(长*宽*高) |
| 净重 | 40.0kg |
| 毛重 | 55.0kg |
* Generated by rule engine over the product database; for pre-selection only.
Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.
Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.
1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.
2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.
3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.
4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.
5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.
| Standard | Title | Scope |
|---|---|---|
| GB/T 4340.1-2009 | Vickers hardness test — test method | Vickers |
| GB/T 230.1-2018 | Rockwell hardness test | Rockwell |
| GB/T 231.1-2018 | Brinell hardness test | Brinell |
| ISO 6507-1 | Vickers hardness test | Export |
| ASTM E92 | Vickers hardness of metallic materials | Americas |
| GB/T 17394.1-2014 | Leeb hardness test | Portable |
Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.
1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.
2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.
3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.
4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.
5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.
6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.
| Model | Principle | Range | Typical use |
|---|---|---|---|
| HRC-150SMJ | Rockwell, motorised digital | HRA/HRB/HRC | Batch sampling in heat treatment |
| HRC-150SM / HRC-150M | Rockwell | HRA/HRB/HRC | Incoming and in-process checks |
| HRC-45M | Superficial Rockwell | 15N/30N/45N | Sheet, plating, case layers |
| HRS-150M / XHRS-150M | Digital Rockwell | HRA/HRB/HRC | Lines needing data upload |
| HBRVS-187.5 | Brinell-Vickers-Rockwell | HBW/HRA/HRB/HRC/HV | Mixed low-volume production |
Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.
Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.
Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.
Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.
Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.
Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.