Connector electronics2024

Cross-section Ni underlayer thickness of gold-plated terminals

BIAS-400 measured 2.3 μm Ni underlayer per ASTM B487 cross-section; ≤8% deviation vs XRF resolved a supplier dispute.

회사명
A connector manufacturer, E. China
주소
Jiangsu
카테고리
Microscopes
Cross-section Ni underlayer thickness of gold-plated terminals
2.3 μmNi underlayer

Gold-plated terminals were judged by XRF to have Ni underlayer below 1.5 μm (contract ≥2 μm); the supplier questioned XRF accuracy on curved surfaces and the lot faced return.

Solution: the BIAS-400 system applied ASTM B487 cross-section arbitration: cold-mounted terminals polished to mid-section, Au and Ni thicknesses measured at 1000X, 5 points averaged per part, compared point-by-point with XRF.

Result: the cross-section method showed 2.3-2.6 μm Ni, meeting the contract; XRF read 30% low at terminal radii due to insufficient curvature correction. Both parties adopted the cross-section method for incoming inspection.

⇄0비교사양 비교