HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
WAW-1000D · 2026-11-17 · +86 21 5748 2007
Electro-hydraulic Servo Universal Testing Machine
By submitting you agree to our privacy policy.
◆该试验机采用微机控制全数字宽频电液数字阀,驱动精密液压缸,对试验力、位移、变形进行多种模式的自动控制,完成对试样的拉伸、压缩、抗弯试验,符合国家标准GB/T228.1-2010《金属材料室温拉伸试验方法》的要求及其他标准要求。
◆试验机主机采用液压缸下置式;调整试验空间的动力及传动装置安装在试验机底部,传动平稳;上下钳口座为全开式结构,自动液压加紧系统,装夹试样方便,稳定性好。
◆.采用联想品牌微机,完成试验过程中试验参数的设定、试验过程的控制、数据采集、处理、分析、存储及显示(试验数据包括:材料抗拉强度、弹性模量、延伸率、屈服强度、规定塑性延伸强度等)、控制及测量精密、准确。
技术参数:
最大试验力
1000kN
试验力测量范围
50~1000kN
试验力示值相对误差
≤示值的±1%
试验力分辨率
0.01kN
位移测量分辨力
0.01mm
变形测量精度
0.01mm
最大拉伸试验空间
750mm
最大压缩空间
380mm
活塞行程
150mm
圆试样钳口夹持直径
Φ13-Φ40mm
扁试样钳口夹持厚度
0-15mm
扁试样最大夹持宽度
75mm
压盘尺寸
φ160mm
弯曲试验两点间最大距离
450mm
弯曲支滚宽度
140mm
弯曲支滚直径
Φ40mm
活塞最大移动速度
50mm/min
夹紧方式
自动加紧
主机外形尺寸
900×710×2200mm
测力柜外形尺寸
1000×700×1400mm
重量
4000kg
WAW-1000D Electro-hydraulic Servo Universal Testing Machine supplied by CHWES. 20 key specifications available on request.
| 试验力测量范围 | 50~1000kN |
|---|---|
| 试验力示值相对误差 | ≤示值的±1% |
| 试验力分辨率 | 0.01kN |
| 位移测量分辨力 | 0.01mm |
| 变形测量精度 | 0.01mm |
| 最大拉伸试验空间 | 750mm |
| 最大压缩空间 | 380mm |
| 活塞行程 | 150mm |
| 圆试样钳口夹持直径 | Φ13-Φ40mm |
| 扁试样钳口夹持厚度 | 0-15mm |
| 扁试样最大夹持宽度 | 75mm |
| 压盘尺寸 | φ160mm |
| 弯曲试验两点间最大距离 | 450mm |
| 弯曲支滚宽度 | 140mm |
| 弯曲支滚直径 | Φ40mm |
| 活塞最大移动速度 | 50mm/min |
| 夹紧方式 | 自动加紧 |
| 主机外形尺寸 | 900×710×2200mm |
| 测力柜外形尺寸 | 1000×700×1400mm |
| 重量 | 4000kg |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.