Electric vehicles2025

Position and profile tolerances on e-drive housing bearing bores

Atlas-B with a scanning probe measures 214 features in 22 minutes with position repeatability within 3 µm, replacing three dedicated gauges.

Firma
E-drive assembly plant, Jiangsu
Adresse
Changzhou, Jiangsu
Position and profile tolerances on e-drive housing bearing bores
40 → 22 minPer part
≤3 μmPosition repeatability
15 万 → 0Gauge cost

The housing has three bearing bores at Φ0.05 position tolerance, two dowel holes and 18 mounting faces. Three dedicated gauges covered the features in separate stations; a model change meant new gauges at six weeks and CNY 150k, and gauges only gave pass or fail without a direction.

Solution: Atlas-B (MPE_E 2.2+L/350) with a scanning probe and rotary table, coordinate system on datums A-B-C, and one program covering 214 features including bore position, face profile, hole spacing and diameter, running in 22 minutes.

Result: 22 minutes against 40 across three stations, position repeatability within 3 µm; the first run showed bore 2 displaced 0.03 mm from datum, traced to a worn locating pin; changeover is now a program change and gauge cost is zero.

⇄0VergleichTechnischer Vergleich