Ô tô2023

Đo nhanh kích thước chi tiết cuộn dây an toàn

YR3020Z đo bước lỗ, chiều cao gờ và góc gập trong 50 giây.

Công ty
Nhà máy phụ tùng an toàn ô tô, Đông Trung Quốc
Địa chỉ
Vô Tích, Giang Tô
Danh mục
Máy đo ảnh
Đo nhanh kích thước chi tiết cuộn dây an toàn
6 min → 50 sThời gian/chi tiết
0.03 → 0.005 mmChênh lệch người đo

The seatbelt retractor bracket is a 2.5 mm high-strength steel stamping with a hole-pitch tolerance of ±0.06 mm. Calipers plus a projector took six minutes per piece, and the two inspectors often disagreed, causing disputes on borderline parts.

Solution: a YR3020Z manual zoom vision machine with a 6.5:1 continuous zoom lens, transmitted plus ring illumination, measuring hole pitch, flange height and bend angle in one clamping; X/Y indication error is ±(3+L/200) µm, and the software judges against the tolerance band automatically.

Result: 50 seconds per piece with repeatability within 3 µm; the inspector-to-inspector difference fell from 0.03 mm to below 0.005 mm.

Benefit: sampling frequency tightened from every two hours to every 30 minutes, so early die wear is caught half a shift sooner.

⇄0So sánhSo sánh thông số