Вопросы
Подбор модели · Методика испытаний
Metallurgical, stereo or toolmaker microscope?
Microstructure and case depth: metallurgical. Fractures and assembly: stereo. Geometry such as holes and threads: toolmaker or vision system.
When to use brightfield, darkfield, polarised light or DIC?
Brightfield for routine structure; darkfield for cracks and second-phase edges; polarised light for anisotropic phases; DIC for low-relief steps such as case-depth transitions.
How do numerical aperture and resolution relate?
δ = 0.61λ/NA. Higher NA gives better resolution but shallower depth of field and shorter working distance. Match total magnification to about 500–1000× NA.
Why do 100× objectives need immersion oil?
Air limits NA to about 0.95; oil with n=1.515 allows NA 1.4 and roughly 1.5× better resolution. Clean the lens immediately after use.
Is a higher-resolution camera always better?
No. Pixels should match the objective resolution (Nyquist). Over-sampling only magnifies noise and lowers frame rate.
