Вопросы

Вопросы

Подбор модели · Методика испытаний

Rockwell, Brinell or Vickers?

Rockwell for fast production checks, Brinell for castings and coarse grains, Vickers for thin parts, case depth and ceramics. Use low-load Vickers for thin or hardened layers.

What thickness does the specimen need?

At least 10× the indentation depth for Vickers and Rockwell; Brinell needs ≥3 mm and 1/3 of the indentation diameter. Thin samples show an anvil effect with high readings.

Can hardness conversion tables be used directly?

Not for acceptance. Conversion tables are statistical results for specific material families. If the drawing says HRC, measure HRC.

How to test curved, thin or small parts?

Use V-blocks with curvature correction for cylinders, low-load Vickers or UCI for thin walls, and mounting/fixtures for small parts.

What daily checks are needed?

Indent a reference block 3–5 times on the working scale. Deviation beyond ±1 HRC (±3% HV) means checking indenter, force, support and temperature.

⇄0СравнениеСравнение характеристик