XHRS-150M Rockwell Hardness Tester

Rockwell Hardness Tester

모델XHRS-150M

    By submitting you agree to our privacy policy.

    01

    제품 개요

    洛氏硬度计MC010系列
    HRS-150M
    触摸屏洛氏硬度计
    HRS-150F
    传感器数显洛氏硬度计
    XHRS-150M 触摸屏数显塑料洛氏硬度计
    YHRI-45M
    传感器数显表面洛氏硬度计
    YHRI-150SM 传感器数显全洛氏硬度计
    HBRVS-187.5 数显全布洛维硬度计
    HBRVS-187.5MV 智能数显布洛维硬度计
    YHRI-150M 传感器数显洛氏硬度计
    YXHRI-150M 传感器数显塑料洛氏硬度计
    HR-150A
    洛氏硬度计
    HR-150DT
    电动洛氏硬度计
    HRS-150
    数显洛氏硬度计
    HRS-150MJ 加高型触摸屏数显洛氏硬度计
    HRZ-150
    智能触摸屏洛氏硬度计
    HRZ-150S
    智能触摸屏全洛氏硬度计
    ZHR-150S
    电脑洛氏硬度计
    ZHR-150SS 电脑全洛氏硬度计
    ZXHR-150S 电脑塑料洛氏硬度计
    HRZ-45
    智能触摸屏表面洛氏硬度计
    ZHR-45S
    电脑表面洛氏硬度计
    HBRV-187.5 布洛维硬度计
    HBRVW-187.5 智能布洛维硬度计
    ZHBRVS-187.5 电脑布洛维硬度计
    显微硬度计
    HMAS-D1000SZA
    自动显微硬度测量分析系统
    HMAS-C1000SZA
    自动显微硬度测量分析系统
    HMAS-D1000(SM)(Z)
    显微硬度测量分析系统
    MVSD
    - 1000AE 单视觉显微硬度计
    MVSD-1000AEZ 单视觉显微硬度计
    HV-1000 显微硬度计
    HV-1000Z 自动转塔显微硬度计
    HVS-1000M 触摸屏显微硬度计
    HVS-1000MZ 触摸屏自动转塔显微硬度计
    MVSS - 1000AE 双视觉显微硬度计
    MVSS - 1000AEZ 双视觉显微硬度计
    HVS-1000 数显显微硬度计
    HVS-1000Z 数显自动转塔显微硬度计
    HMAS-D
    显微硬度计测量分析系统
    HMAS-DS 显微硬度计测量分析系统
    HMAS-DSZ 显微硬度计测量分析系统
    HMAS-DSM 显微硬度计测量分析系统
    HMAS-DSMZ 显微硬度计测量分析系统
    HMAS-CSZD 显微硬度计测量分析系统
    HMAS-CSZA 显微硬度计测量分析系统
    HMAS-ROLL 版辊显微硬度测量分析系统
    维氏硬度计MC010系列
    HMAS-D5/10/30/50(M)(Z)
    维氏硬度测量分析系统
    HMAS-D5/10/30/50SZA
    自动维氏硬度测量分析系统
    HMAS-C5/10/30/50SZA
    自动维氏硬度测量分析系统
    HMAS 硬度测量分析系统
    MVSD -
    5/10/30/50AEZ 视觉维氏硬度计
    MVSD -
    5/10/30/50AE 视觉维氏硬度计
    HVI-5/10/20/30/40/50/100 传感器数显维氏硬度计
    HVI-5/10/20/30/40/50/100Z 自动转塔传感器数显维氏硬度计
    HVS5-50M
    触摸屏维氏硬度计
    HVS5-50MZ 触摸屏自动转塔维氏硬度计
    HV5-50
    维氏硬度计
    HV5-50Z
    自动转塔维氏硬度计
    MVSS -
    5/10/30/50AEZ 双视觉维氏硬度计
    MVSS -
    5/10/30/50AE 双视觉维氏硬度计
    HVS-5
    5公斤力数显维氏硬度计
    HVS-5Z
    5公斤力数显转塔维氏硬度计
    HVS-10
    10公斤力数显维氏硬度计
    HVS-10Z
    10公斤力数显转塔维氏硬度计
    HVS-20
    20公斤力数显维氏硬度计
    HVS-20Z
    20公斤力数显转塔维氏硬度计
    HVS-30
    30公斤力数显维氏硬度计
    HVS-30Z
    30公斤力数显转塔维氏硬度计
    HVS-50
    50公斤力数显维氏硬度计
    HVS-50Z
    50公斤力数显转塔维氏硬度计
    HV-5
    5公斤力维氏硬度计
    HV-5Z
    5公斤力自动转塔维氏硬度计
    HV-10
    10公斤力维氏硬度计
    HV-10Z
    10公斤力自动转塔维氏硬度计
    HV-20
    20公斤力维氏硬度计
    HV-20Z
    20公斤力自动转塔维氏硬度计
    HV-30
    30公斤力维氏硬度计
    HV-30Z
    30公斤力自动转塔维氏硬度计
    HV-50
    50公斤力维氏硬度计
    HV-50Z
    50公斤力自动转塔维氏硬度计
    YHV-MZ
    传感器自动转塔数显维氏硬度计系列
    YHV-M
    传感器数显维氏硬度计系列
    FV
    研究型维氏硬度计
    HMAS-D5
    维氏硬度计测量分析系统
    HMAS-D5Z
    维氏硬度计测量分析系统
    HMAS-D5SM 维氏硬度计测量分析系统
    HMAS-D5SMZ 维氏硬度计测量分析系统
    HMAS-C5SZA 维氏硬度计测量分析系统
    HMAS-HT
    高温维氏硬度计测控系统
    HMAS-LT
    超低温维氏硬度计测控系统
    IMAS
    金属基复合材料压痕仪(断裂韧性和残余应力)
    布氏硬度计 MC010系列
    HBS-3000MV 视觉布氏硬度计
    HBE-3000C 数显布氏硬度计
    HBS-3000L 触摸屏布氏硬度计
    HMAS-D3000HB 布氏硬度计测量分析系统
    HMAS-HB
    便携式布氏硬度测量分析系统
    HBS-62.5M 触摸屏小负荷布氏硬度计
    HBS-62.5MZ 触摸屏小负荷布氏硬度计
    HB-2
    锤击式布氏硬度计
    HBE-3000A 电子布氏硬度计
    HBS-62.5
    触摸屏小负荷布氏硬度计
    HBS-3000
    数显布氏硬度计
    HMAS-DHB
    布氏硬度计测量分析系统
    HMAS-DHBL 布氏硬度计测量分析系统
    HBM-2017A 数显异形布氏硬度计
    邵氏硬度计/巴氏硬度计/韦氏硬度计MC010系列
    LX-A/D/C
    邵氏橡胶硬度计
    LXS-A/D/C
    数显邵氏硬度计
    HLX-A/C
    邵氏硬度计支架
    HLX-D
    邵氏硬度计支架
    HLXS-A/C
    数显邵氏硬度计支架
    HLXS-D
    数显邵氏硬度计支架
    934-1 巴氏硬度计
    HBA-1 巴氏硬度计
    W-20 韦氏硬度计
    W-20A
    铝合金韦氏硬度计
    W-20B
    铝合金韦氏硬度计
    W-B75
    铜合金(黄铜)韦氏硬度计
    W-B75B
    细管专用铜合金(黄铜)韦氏硬度计
    W-BB75
    铜合金(紫铜)韦氏硬度计
    W-BB75B
    细管专用铜合金(紫铜)韦氏硬度计
    W-B92
    不锈钢韦氏硬度计
    进口硬度计
    MIC10 超声波硬度计
    MIC20
    组合式超声波硬度计
    TIV 便携式光学硬度计
    TKM-459
    超声波硬度计
    DynaMIC
    回弹硬度监测仪
    DynaPOCKET 动态回弹硬度计
    硬度计耗材/配件MC010系列
    自准直仪/平面度检查仪MC030系列
    金相切割机MC004系列
    金相磨抛机MC004系列
    金相镶嵌机MC004系列
    CMAS清洁度检测分析系统
    MMAS科研级工业自动显微镜测量系统
    IMAS复合材料断裂韧性残余应力检测仪
    BMAS材料气泡测量分析系统
    金相显微镜
    体视显微镜
    生物显微镜
    偏光显微镜/荧光显微镜
    其它显微镜(工具/比较/进口)
    电子万能试验机MC009系列
    液压万能试验机MC009系列
    冲击试验机MC009系列
    光谱仪
    元素分析仪/碳硫分析仪
    色谱仪
    光度计
    影像测量仪
    投影仪
    三坐标测量机
    轮廓仪
    圆度仪
    探伤仪
    粗糙度仪
    测高仪
    测厚仪
    测温仪
    测振仪
    石油化工仪器
    气体检测仪
    食品仪器
    内窥镜
    人工智能设备
    4008127833/021-58391850
    扫一扫关注我们
    硬度计案例 硬度计技术
    试验机案例 试验机技术
    金相制样案例 金相制样技术
    自准直仪案例 自准直仪技术
    显微镜案例 显微镜技术
    实验室保养 实验室搬迁
    研润简介 研润发展历程
    人才与招聘
    研润旗下产品及公司简介
    维氏硬度计 洛氏硬度计 硬度计
    自准直仪 拉力试验机 硬度计
    万能试验机 金相抛光机 硬度计
    金相切割机 金相切割机 硬度计
    圆度仪 轮廓仪 硬度计 硬度计
    自准直仪 自准直仪 硬度计
    显微镜 金相显微镜 硬度计
    金相切割机 影像测量仪 硬度计
    布氏硬度计 自准直仪 金相磨抛机
    硬度计 自准直仪 硬度计,金相切割机
    上海研润光机科技有限公司成立于2005年,是
    一家以研发、生产、非标定制自动化检测设备,
    计算机软件开发为主的高新技术企业。主导产品
    光学和材料性能仪器,包括硬度计、试验机、显
    微镜、金相制样、工业自动化流水线定制、非标
    自动化质量控制检验、工业机器人、高精度光学
    自准直仪、残余应力测试、复合材料测试等设备。
    XHRS-150M 传感器数显全洛氏硬度计

    XHRS-150M Rockwell Hardness Tester supplied by CHWES. 0 key specifications available on request.

    02

    사양

    * Generated by rule engine over the product database; for pre-selection only.

    03

    측정 원리

    Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.

    Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.

    • Vickers 0.01–100 kgf: full range, thin layers and case-depth gradients.
    • Rockwell C 150 kgf: fast batch checking of hardened parts.
    • Brinell: castings, annealed and coarse-grain materials.
    • Leeb: portable rebound testing on large parts.
    04

    Process animation

    1. Preparation: polish to Ra ≤ 0.4 µm, remove work-hardened layers.
    2. Mount and align: place the specimen, position the indenter over the test point.
    3. Heat up (hot hardness): evacuate to ≤10⁻² Pa or backfill argon, ramp and soak.
    4. Load: apply force at the set rate, dwell 10–15 s.
    5. Measure: read diagonals or depth, compute HV/HRC.
    6. Gradient: step along depth and plot hardness versus distance.
    0102030405
    05

    Calculation & formulas

    1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.

    2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.

    3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.

    4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.

    5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.

    06

    규격

    StandardTitleScope
    GB/T 4340.1-2009Vickers hardness test — test methodVickers
    GB/T 230.1-2018Rockwell hardness testRockwell
    GB/T 231.1-2018Brinell hardness testBrinell
    ISO 6507-1Vickers hardness testExport
    ASTM E92Vickers hardness of metallic materialsAmericas
    GB/T 17394.1-2014Leeb hardness testPortable

    Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.

    07

    선택 가이드

    1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.

    2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.

    3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.

    4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.

    5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.

    6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.

    ModelPrincipleRangeTypical use
    HRC-150SMJRockwell, motorised digitalHRA/HRB/HRCBatch sampling in heat treatment
    HRC-150SM / HRC-150MRockwellHRA/HRB/HRCIncoming and in-process checks
    HRC-45MSuperficial Rockwell15N/30N/45NSheet, plating, case layers
    HRS-150M / XHRS-150MDigital RockwellHRA/HRB/HRCLines needing data upload
    HBRVS-187.5Brinell-Vickers-RockwellHBW/HRA/HRB/HRC/HVMixed low-volume production

    Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.

    08

    시험 방법

    Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.

    Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.

    Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.

    Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.

    Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.

    09

    Industry applications

    • Heat-treatment shops: Rockwell HRC sampling of quenched and tempered parts, carburised surface hardness, Brinell HBW on annealed stock.
    • Castings and forgings: body hardness and HAZ values, section hardness gradients indicating cooling rate and structural uniformity.
    • Moulds and tools: HRC versus wear resistance after hardening and tempering, edge-to-core hardness difference on cutting tools.
    • Thin and small parts: case-hardened layers, coatings and sheet need Vickers or superficial Rockwell (HBRVS-187.5 covers HRA/HRB/HRC/HV/HB).
    • Bearings and gears: ring and raceway hardness, case-to-core difference against carburising requirements.
    • Pressure vessels and piping: weld and HAZ hardness to detect brittle microstructures, typically ≤350 HV10.
    • Incoming verification: hardness as the fastest screening method when material grades are mixed, confirmed by OES.
    • Field and in-service: portable Leeb or ultrasonic hardness testers on large immovable parts, corrected against a bench reference.
    10

    Price and lead time for this model

    By submitting you agree to our privacy policy.

    ⇄0비교사양 비교