HMAS-D1000SZA Micro Vickers Hardness Tester

Micro Vickers Hardness Tester

모델HMAS-D1000SZA
  • 测量分析系统HMAS硬度测量分析系统
  • 光学成像系统显微硬度大三通光学成像系统
  • 转塔方式自动转塔
  • 升降机构精密梯形丝杆

By submitting you agree to our privacy policy.

01

제품 개요

HMAS-D1000SZA
自动显微硬度测量系统专为金属及部分非金属材料的显微维氏硬度测定而设计,集光学成像、精密位移与智能控制于一体,可自动完成压痕数字成像与读数。适用于机加工件、锻件、铸铁、铸钢等材质,亦可精准评估有效硬化层深度、涂镀层结合力及焊接热影响区硬度,同时实现对内部金相组织的高清观察与图像采集。
技术参数:
型号
HMAS‑D1000SZA
测量分析系统
HMAS硬度测量分析系统
光学成像系统
显微硬度大三通光学成像系统
转塔方式
自动转塔
升降机构
精密梯形丝杆
变荷装置机构
齿轮垂直加载
试验力
(8 级) N: 0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N; (8 级) gf:
10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf; (8 级) 标尺:
HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
聚焦方式
手动
X/Y 平台
自动
Z 轴升降
手动
硬度打压
电脑控制
梯度测试
电脑控制(自动连续打压)
硬度测量
连打连测 + 单点自动 / 手动(多测量系统)
光源调节
电脑控制
长度测量
电脑自动
测试定点
自动导航定位 / 路径自动定位
基点补偿
自动
断裂韧性
软件计算
放大倍数
(23 寸屏) 10X 物镜,总放大倍数约 320X;40X 物镜,总放大倍数约 1200 倍
理论硬度测量范围
8‑3000HV
试验力加载
全自动(加载 / 保荷 / 卸载)
执行国家标准
GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
X‑Y 移动平台
试台尺寸:140*180mm,移动范围50*50mm,最小步距0.1μm
硬度值显示方式
(双系统测量) 主机单独测量 / 电脑软件测量分析
主机最小检测单位
0.025μm
试验力保持时间
0‑60 秒,最小变动量 1 秒
试件最大高度
135mm
压头中心到内壁距离
170mm
电源电压
AC 220V/50Hz
外形尺寸
220*570*680mm(长*宽*高)
净重
46.0kg
毛重
61.0kg

HMAS-D1000SZA Micro Vickers Hardness Tester supplied by CHWES. 32 key specifications available on request.

02

사양

测量分析系统HMAS硬度测量分析系统
光学成像系统显微硬度大三通光学成像系统
转塔方式自动转塔
升降机构精密梯形丝杆
变荷装置机构齿轮垂直加载
试验力(8 级) N: 0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N; (8 级) gf: 10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf; (8 级) 标尺: HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
聚焦方式手动
X/Y 平台自动
Z 轴升降手动
硬度打压电脑控制
梯度测试电脑控制(自动连续打压)
硬度测量连打连测 + 单点自动 / 手动(多测量系统)
光源调节电脑控制
长度测量电脑自动
测试定点自动导航定位 / 路径自动定位
基点补偿自动
断裂韧性软件计算
放大倍数(23 寸屏) 10X 物镜,总放大倍数约 320X;40X 物镜,总放大倍数约 1200 倍
理论硬度测量范围8‑3000HV
试验力加载全自动(加载 / 保荷 / 卸载)
执行国家标准GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
X‑Y 移动平台试台尺寸:140*180mm,移动范围50*50mm,最小步距0.1μm
硬度值显示方式(双系统测量) 主机单独测量 / 电脑软件测量分析
主机最小检测单位0.025μm
试验力保持时间0‑60 秒,最小变动量 1 秒
试件最大高度135mm
压头中心到内壁距离170mm
电源电压AC 220V/50Hz
外形尺寸220*570*680mm(长*宽*高)
净重46.0kg
毛重61.0kg

* Generated by rule engine over the product database; for pre-selection only.

03

측정 원리

Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.

Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.

  • Vickers 0.01–100 kgf: full range, thin layers and case-depth gradients.
  • Rockwell C 150 kgf: fast batch checking of hardened parts.
  • Brinell: castings, annealed and coarse-grain materials.
  • Leeb: portable rebound testing on large parts.
04

Process animation

  1. Preparation: polish to Ra ≤ 0.4 µm, remove work-hardened layers.
  2. Mount and align: place the specimen, position the indenter over the test point.
  3. Heat up (hot hardness): evacuate to ≤10⁻² Pa or backfill argon, ramp and soak.
  4. Load: apply force at the set rate, dwell 10–15 s.
  5. Measure: read diagonals or depth, compute HV/HRC.
  6. Gradient: step along depth and plot hardness versus distance.
0102030405
05

Calculation & formulas

1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.

2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.

3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.

4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.

5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.

06

규격

StandardTitleScope
GB/T 4340.1-2009Vickers hardness test — test methodVickers
GB/T 230.1-2018Rockwell hardness testRockwell
GB/T 231.1-2018Brinell hardness testBrinell
ISO 6507-1Vickers hardness testExport
ASTM E92Vickers hardness of metallic materialsAmericas
GB/T 17394.1-2014Leeb hardness testPortable

Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.

07

선택 가이드

1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.

2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.

3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.

4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.

5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.

6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.

ModelPrincipleRangeTypical use
HRC-150SMJRockwell, motorised digitalHRA/HRB/HRCBatch sampling in heat treatment
HRC-150SM / HRC-150MRockwellHRA/HRB/HRCIncoming and in-process checks
HRC-45MSuperficial Rockwell15N/30N/45NSheet, plating, case layers
HRS-150M / XHRS-150MDigital RockwellHRA/HRB/HRCLines needing data upload
HBRVS-187.5Brinell-Vickers-RockwellHBW/HRA/HRB/HRC/HVMixed low-volume production

Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.

08

시험 방법

Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.

Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.

Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.

Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.

Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.

09

Industry applications

  • Heat-treatment shops: Rockwell HRC sampling of quenched and tempered parts, carburised surface hardness, Brinell HBW on annealed stock.
  • Castings and forgings: body hardness and HAZ values, section hardness gradients indicating cooling rate and structural uniformity.
  • Moulds and tools: HRC versus wear resistance after hardening and tempering, edge-to-core hardness difference on cutting tools.
  • Thin and small parts: case-hardened layers, coatings and sheet need Vickers or superficial Rockwell (HBRVS-187.5 covers HRA/HRB/HRC/HV/HB).
  • Bearings and gears: ring and raceway hardness, case-to-core difference against carburising requirements.
  • Pressure vessels and piping: weld and HAZ hardness to detect brittle microstructures, typically ≤350 HV10.
  • Incoming verification: hardness as the fastest screening method when material grades are mixed, confirmed by OES.
  • Field and in-service: portable Leeb or ultrasonic hardness testers on large immovable parts, corrected against a bench reference.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0비교사양 비교