MVSD-1000AEZ Micro Vickers Hardness Tester

Micro Vickers Hardness Tester

모델MVSD-1000AEZ
  • 转塔方式自动转塔
  • 测量分析系统研润材料分析测量软件
  • 光学成像系统显微硬度光学系统
  • 变荷装置机构齿轮垂直加载

By submitting you agree to our privacy policy.

01

제품 개요

我司自主研发生产的第五代视觉维氏硬度计是一款基于安卓系统开发的高精度光学仪器、智能化数据分析与自动化测试于一体的先进材料检测设备。通过融合视觉技术与维氏硬度测试原理,实现了硬度值测量的高效化、精准化与数字化、广泛应用于金属、合金、陶瓷、半导体等材料的硬度检测、尤其是金属部件热处理后的硬化层深度的准确测试。满足科研、教学、质检及工业生产领域的多样化需求。
产品特点:
1.铸铝工艺与汽车烤漆技术:采用一次浇筑成型的铸铝工艺,结合汽车级烤漆工艺于60度高温下的烘烤处理,造就设备卓越的耐用性与抗磨损特性。
2.精密垂直升降机构与步进电机控制:配备1.8度细分精度的步进电机,实现8000步距的精准控制,确保转塔自动定位的高精度。
3.高速垂直加卸载机制:每秒约45微米的垂直加卸载速度,确保加载过程的稳定性与准确性,为测试结果的精确性奠定坚实基础。
4.双系统成像的半透半反光学系统:创新设计的光学系统,支持双系统成像,极大提升了图像清晰度与测量精度。
5.国际标准符合性:测试精度符合GB/T4340.2、ISO6507、ASTM
E384等国际权威标准,确保测试结果的全球认可度。
6.高清彩色触摸屏与用户界面:配备10.1寸高清彩色触摸屏,搭配180度可操作的用户界面设计,提供直观便捷的操作体验。
7.自动材料硬度修正功能:具备自动修正凹凸材料硬度值的能力,确保在不同材料表面进行硬度测试时的准确度。
8.多标准硬度值换算:支持即时查看GB、ISO、ASTM标准下的硬度换算值,满足多领域测试需求。
9.范围设定与报警功能集成:硬度测试范围可自由设定,超出预设范围时将自动报警,确保测结果的有效控制。
10.实时压痕深度曲线显示:独立的压痕分布图与深度曲线图实时呈现,精确展示每个压痕,便于深入分析。
11.浮点算法优化测量:采用全新浮点算法,进一步优化测量结果的准确性,满足最苛刻的测试需求。
12.多功能参数测量:具备测量长度、角度、韧性的能力,拓展了设备的应用范围与测试能力。
13.自定义移动与深度计算:支持自定义移动距离与自动深度计算功能,提升测试效率与灵活性。
14.无限数据存储与图片保存:可无限制存储硬度测试结果与图片,便于后期数据分析与查阅。
技术参数:
型号
单视觉 MVSD‑1000AEZ
转塔方式
自动转塔
测量分析系统
研润材料分析测量软件
光学成像系统
显微硬度光学系统
变荷装置机构
齿轮垂直加载
升降机构
精密梯形丝杆
试验力
(8 级) N:
0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N;(8
级) gf:
10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf;(8
级) 标尺:
HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
操作系统
AI 端控制
硬度测量
AI 一键测量
物镜切换
平板电脑
力值档位显示
AI 显示
试验力加载
全自动(加载 / 保荷 / 卸载)
执行国家标准
GB/T4340
国家标准,ISO6507
质量认证,ASTM 标准
理论硬度测量范围
8‑3000HV(可选更大范围)
放大倍数
100X、400X
数显目镜(160X、640X
平板)
最小测量单位
0.03μm
试验力保荷时间
0‑60 秒,最小变动量 1 秒
试件最大高度
70mm
压头中心到内壁距离
110mm
外形尺寸
320*430*460mm(长*宽*高)
净重
26.0kg
毛重
42.0kg

MVSD-1000AEZ Micro Vickers Hardness Tester supplied by CHWES. 22 key specifications available on request.

02

사양

转塔方式自动转塔
测量分析系统研润材料分析测量软件
光学成像系统显微硬度光学系统
变荷装置机构齿轮垂直加载
升降机构精密梯形丝杆
试验力(8 级) N: 0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N;(8 级) gf: 10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf;(8 级) 标尺: HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
操作系统AI 端控制
硬度测量AI 一键测量
物镜切换平板电脑
力值档位显示AI 显示
试验力加载全自动(加载 / 保荷 / 卸载)
执行国家标准GB/T4340 国家标准,ISO6507 质量认证,ASTM 标准
理论硬度测量范围8‑3000HV(可选更大范围)
放大倍数100X、400X 数显目镜(160X、640X 平板)
最小测量单位0.03μm
试验力保荷时间0‑60 秒,最小变动量 1 秒
试件最大高度70mm
压头中心到内壁距离110mm
外形尺寸320*430*460mm(长*宽*高)
净重26.0kg
毛重42.0kg

* Generated by rule engine over the product database; for pre-selection only.

03

측정 원리

Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.

Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.

  • Vickers 0.01–100 kgf: full range, thin layers and case-depth gradients.
  • Rockwell C 150 kgf: fast batch checking of hardened parts.
  • Brinell: castings, annealed and coarse-grain materials.
  • Leeb: portable rebound testing on large parts.
04

Process animation

  1. Preparation: polish to Ra ≤ 0.4 µm, remove work-hardened layers.
  2. Mount and align: place the specimen, position the indenter over the test point.
  3. Heat up (hot hardness): evacuate to ≤10⁻² Pa or backfill argon, ramp and soak.
  4. Load: apply force at the set rate, dwell 10–15 s.
  5. Measure: read diagonals or depth, compute HV/HRC.
  6. Gradient: step along depth and plot hardness versus distance.
0102030405
05

Calculation & formulas

1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.

2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.

3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.

4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.

5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.

06

규격

StandardTitleScope
GB/T 4340.1-2009Vickers hardness test — test methodVickers
GB/T 230.1-2018Rockwell hardness testRockwell
GB/T 231.1-2018Brinell hardness testBrinell
ISO 6507-1Vickers hardness testExport
ASTM E92Vickers hardness of metallic materialsAmericas
GB/T 17394.1-2014Leeb hardness testPortable

Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.

07

선택 가이드

1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.

2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.

3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.

4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.

5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.

6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.

ModelPrincipleRangeTypical use
HRC-150SMJRockwell, motorised digitalHRA/HRB/HRCBatch sampling in heat treatment
HRC-150SM / HRC-150MRockwellHRA/HRB/HRCIncoming and in-process checks
HRC-45MSuperficial Rockwell15N/30N/45NSheet, plating, case layers
HRS-150M / XHRS-150MDigital RockwellHRA/HRB/HRCLines needing data upload
HBRVS-187.5Brinell-Vickers-RockwellHBW/HRA/HRB/HRC/HVMixed low-volume production

Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.

08

시험 방법

Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.

Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.

Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.

Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.

Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.

09

Industry applications

  • Heat-treatment shops: Rockwell HRC sampling of quenched and tempered parts, carburised surface hardness, Brinell HBW on annealed stock.
  • Castings and forgings: body hardness and HAZ values, section hardness gradients indicating cooling rate and structural uniformity.
  • Moulds and tools: HRC versus wear resistance after hardening and tempering, edge-to-core hardness difference on cutting tools.
  • Thin and small parts: case-hardened layers, coatings and sheet need Vickers or superficial Rockwell (HBRVS-187.5 covers HRA/HRB/HRC/HV/HB).
  • Bearings and gears: ring and raceway hardness, case-to-core difference against carburising requirements.
  • Pressure vessels and piping: weld and HAZ hardness to detect brittle microstructures, typically ≤350 HV10.
  • Incoming verification: hardness as the fastest screening method when material grades are mixed, confirmed by OES.
  • Field and in-service: portable Leeb or ultrasonic hardness testers on large immovable parts, corrected against a bench reference.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0비교사양 비교