HMAS-D1000SMZ Micro Vickers Hardness Tester (SM)

Micro Vickers Hardness Tester · SM

모델HMAS-D1000SMZ
  • 测量分析系统HMAS-D显微硬度测量分析系统
  • 光学成像系统显微硬度大三通光学成像系统
  • 主机屏幕LCD屏 / 触摸屏 / LCD屏 / 触摸屏
  • 转塔方式手动转塔 / 自动转塔

By submitting you agree to our privacy policy.

01

제품 개요

HMAS-D1000(SM)(Z) 显微硬度测量分析系统新一代AI-PC端与硬度主机实时互联,系统一键驱动打
压、转塔切换、自动对焦与高清成像,全流程无人值守。
既满足常规硬度测量,又支持精确定位、梯度硬度、断
裂韧性及几何尺寸等多维度检测,数据同步回传,结果
即刻呈现。
软件控制与交互:双向实时通讯毫秒级响应,断线自检提示。软件控制转塔:转塔运动自动切换。
试验力判断:力
值切换自动读取。
照明及保荷:软件控制自动下发。
打压痕:软件控制全自动加载、保荷、卸载。
交互界面与功能:模块化UI可拖拽面板布局,自定义工作区。
视频辅助:5种中心线满足不同的压痕中心定位要求,
可个性化配置颜色、线条宽度、字号大小。
移动辅助:独有的网格距离及路径规划功能、配合个性化配置使渗层测
试时移动距离更加直观准确。
背景着色:13种成像技术、实时视频背景着色使不同材料成像更加清晰。
数据管理与输出:压痕图谱:图像+测试参数叠加。
多维度报表:硬度报表集成、基础信息、自定义信息、数据分
析等多项内容,并可配置信息内容及压痕图片的个性化,统计图表自动生成(CPK数据分析)。
测量与分析引擎:硬度测量:6种模式手动+自动模式。
压痕测量:鼠标滚轮放大图像使测量切线更加精准。
多压痕:
同一图像内多个压痕快速定位聚、数据与压痕测量线高亮提示。
数据联动:硬度值-分布曲线-压痕图谱三视图同步,
并均可独立导出保存。
支持动态硬度修正、硬度换算、合格判断。
硬度数据:26种辅助特性列表任意选择、并可独
立导出报表。
压痕相册:独有的压痕图片与信息合成、可自定义及个性化配置,使每张压痕图片都似一张硬度报告。
几何特性.8类T具(长度/圆度/角度等) 几何特性:8类工具(长度/圆度/角度等)+17种特性辅助、可自定义。
生成独立的几何测量报表。
技术参数:
型号
HMAS-D1000
HMAS-D1000SM
HMAS-D1000Z
HMAS-D1000SMZ
测量分析系统
HMAS-D显微硬度测量分析系统
光学成像系统
显微硬度大三通光学成像系统
主机屏幕
LCD屏
触摸屏
LCD屏
触摸屏
转塔方式
手动转塔
自动转塔
升降机构
精密梯形丝杠
变荷装置机构
齿轮垂直加载
试验力
(8级)N:0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N
(8级)gf:10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf
(8级)标尺:HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺
HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
执行国家标准
GB/T4340 国家标准, ISO6507 质量认证, ASTM 标准
X-Y移动平台
试台尺寸:100*100mm,试台移动范围25*25mm,机械读数0.01mm
理论硬度测量范围
8-3000HV(可选更大范围)
硬度值显示方式
(双系统测量)主机单独测量/电脑软件测量分析
目镜倍率
10X
物镜倍率
10X(观察)、40X(测量)
总放大倍数
100X(观察),400X(测量),电脑放大约1500X(测量)
主机最小检测单位
0.25μm
0.0158μm
0.25μm
0.0158μm
试验力保荷时间
0-99秒,最小变动量1秒
0-60秒,最小变动量1秒
0-99秒,最小变动量1秒
0-60秒,最小变动量1秒
试件最大高度
70mm
压头中心到内壁距离
110mm
外形尺寸
220*450*460mm(长*宽*高)
净重
29.0kg
毛重
46.0kg

HMAS-D1000SMZ Micro Vickers Hardness Tester (SM) supplied by CHWES. 22 key specifications available on request.

02

사양

测量分析系统HMAS-D显微硬度测量分析系统
光学成像系统显微硬度大三通光学成像系统
主机屏幕LCD屏 / 触摸屏 / LCD屏 / 触摸屏
转塔方式手动转塔 / 自动转塔
升降机构精密梯形丝杠
变荷装置机构齿轮垂直加载
试验力(8级)N:0.098N、0.245N、0.490N、0.981N、1.961N、2.942N、4.903N、9.807N(8级)gf:10gf、25gf、50gf、100gf、200gf、300gf、500gf、1000gf(8级)标尺:HV0.01、HV0.025、HV0.05、HV0.1、HV0.2、HV0.3、HV0.5、HV1
转换标尺HV、HK、HBW、HRA、HRB、HRC、HRD、HRF、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T
执行国家标准GB/T4340 国家标准, ISO6507 质量认证, ASTM 标准
X-Y移动平台试台尺寸:100*100mm,试台移动范围25*25mm,机械读数0.01mm
理论硬度测量范围8-3000HV(可选更大范围)
硬度值显示方式(双系统测量)主机单独测量/电脑软件测量分析
目镜倍率10X
物镜倍率10X(观察)、40X(测量)
总放大倍数100X(观察),400X(测量),电脑放大约1500X(测量)
主机最小检测单位0.25μm / 0.0158μm / 0.25μm / 0.0158μm
试验力保荷时间0-99秒,最小变动量1秒 / 0-60秒,最小变动量1秒 / 0-99秒,最小变动量1秒 / 0-60秒,最小变动量1秒
试件最大高度70mm
压头中心到内壁距离110mm
外形尺寸220*450*460mm(长*宽*高)
净重29.0kg
毛重46.0kg

* Generated by rule engine over the product database; for pre-selection only.

03

측정 원리

Hardness testing presses an indenter into the surface under a constant load and converts indentation size or depth into a hardness value. Vickers uses a 136° diamond pyramid: HV = 0.1891 × F(N)/d²(mm), where d is the mean diagonal.

Hot hardness is performed in vacuum or high-purity inert gas. Specimen and indenter are heated independently and must be at the same temperature or corrected per the standard; loading, dwell and unloading all happen inside the hot zone, and the indentation is measured through a high-temperature optic or after cooling. The HMAS series uses a uniform hot zone with ±5 °C uniformity from 200 to 1600 °C.

  • Vickers 0.01–100 kgf: full range, thin layers and case-depth gradients.
  • Rockwell C 150 kgf: fast batch checking of hardened parts.
  • Brinell: castings, annealed and coarse-grain materials.
  • Leeb: portable rebound testing on large parts.
04

Process animation

  1. Preparation: polish to Ra ≤ 0.4 µm, remove work-hardened layers.
  2. Mount and align: place the specimen, position the indenter over the test point.
  3. Heat up (hot hardness): evacuate to ≤10⁻² Pa or backfill argon, ramp and soak.
  4. Load: apply force at the set rate, dwell 10–15 s.
  5. Measure: read diagonals or depth, compute HV/HRC.
  6. Gradient: step along depth and plot hardness versus distance.
0102030405
05

Calculation & formulas

1. Rockwell: HR = K − h/0.002 (K = 100 for HRC, 130 for HRB). At h = 0.078 mm, HRC = 61.

2. Brinell: HBW = 2F/(πD(D−√(D²−d²))); with F=1838.6 N, D=2.5 mm, d=1.1 mm, HBW ≈ 192.

3. Vickers: HV = 0.1891·F/d² (F in N); F=9.807 N with d=0.05 mm gives HV ≈ 742.

4. Test forces: choose Brinell loads by 0.045F/D²; Rockwell 10 kgf preliminary with 60/100/150 kgf total; surface scales 3 / 15/30/45 kgf.

5. Conversions: HRC ≈ HBW/10 only as a rough mid-range guide — official reports must follow the GB/T 1172 tables.

06

규격

StandardTitleScope
GB/T 4340.1-2009Vickers hardness test — test methodVickers
GB/T 230.1-2018Rockwell hardness testRockwell
GB/T 231.1-2018Brinell hardness testBrinell
ISO 6507-1Vickers hardness testExport
ASTM E92Vickers hardness of metallic materialsAmericas
GB/T 17394.1-2014Leeb hardness testPortable

Hot hardness has no unified national standard; ASTM E92 practice is normally cited with temperature, atmosphere, dwell and indenter material stated in the report.

07

선택 가이드

1. Principle follows the target: Rockwell for macro hardness and heat-treatment acceptance; Brinell for cast iron, annealed and forged parts where a large indent is representative; Vickers or micro-Vickers for thin layers, coatings and small areas.

2. Bench or portable: bench units (HRC-150SMJ, HBRVS-187.5) where parts can be brought in; portable Leeb for large moulds, in-service piping and non-removable parts, corrected against a bench reference, typically within ±2 HRC.

3. One for many: mixed, low-volume shops do well with a Brinell-Vickers-Rockwell combination unit covering HRA/HRB/HRC/HV/HB.

4. Automation: manual below 100 parts per operator per day; motorised elevation, automatic loading and data upload (HRC-150SMJ) above 200 or for unattended runs.

5. Reference blocks: two to three blocks covering the working range, checked every shift and sent for annual calibration.

6. Specimen requirements: Rockwell needs thickness at least ten times the indent depth and Ra ≤1.6 µm; otherwise switch to Vickers or superficial Rockwell.

ModelPrincipleRangeTypical use
HRC-150SMJRockwell, motorised digitalHRA/HRB/HRCBatch sampling in heat treatment
HRC-150SM / HRC-150MRockwellHRA/HRB/HRCIncoming and in-process checks
HRC-45MSuperficial Rockwell15N/30N/45NSheet, plating, case layers
HRS-150M / XHRS-150MDigital RockwellHRA/HRB/HRCLines needing data upload
HBRVS-187.5Brinell-Vickers-RockwellHBW/HRA/HRB/HRC/HVMixed low-volume production

Three rules for trustworthy data: check the reference block every shift and record it; keep the support face flat and clean; keep indent spacing at least three indent diameters.

08

시험 방법

Specimen. Test and support faces parallel; thickness at least 1.5 × diagonal (Vickers) or 10 × depth (Rockwell); Ra ≤ 0.4 µm, free of scale and oil.

Room temperature. Select load, apply within 10–15 s, dwell 10–15 s, unload, measure diagonals. Spacing between indentations ≥3d, from the edge ≥2.5d.

Hot hardness. Load the specimen, evacuate or backfill argon, ramp and soak 20–30 min, lower the indenter, load and dwell, unload, cool or measure hot, then apply the temperature correction.

Gradient. Step every 0.05–0.1 mm to the hardness plateau; determine effective case depth at 550 HV1 per GB/T 9450.

Quality control. Check a certified block (e.g. 700 HV1) each shift, recalibrate beyond ±3%, and log furnace curves and atmosphere for hot tests.

09

Industry applications

  • Heat-treatment shops: Rockwell HRC sampling of quenched and tempered parts, carburised surface hardness, Brinell HBW on annealed stock.
  • Castings and forgings: body hardness and HAZ values, section hardness gradients indicating cooling rate and structural uniformity.
  • Moulds and tools: HRC versus wear resistance after hardening and tempering, edge-to-core hardness difference on cutting tools.
  • Thin and small parts: case-hardened layers, coatings and sheet need Vickers or superficial Rockwell (HBRVS-187.5 covers HRA/HRB/HRC/HV/HB).
  • Bearings and gears: ring and raceway hardness, case-to-core difference against carburising requirements.
  • Pressure vessels and piping: weld and HAZ hardness to detect brittle microstructures, typically ≤350 HV10.
  • Incoming verification: hardness as the fastest screening method when material grades are mixed, confirmed by OES.
  • Field and in-service: portable Leeb or ultrasonic hardness testers on large immovable parts, corrected against a bench reference.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0비교사양 비교