AMM-8ST Metallurgical Microscope

Metallurgical Microscope

모델AMM-8ST
  • 大型研发倒置卧式金相显微镜大型研发数码倒置卧式金相显微镜 / 大型研发视频图像倒置卧式金相显微镜 / 大型研发图像处理倒置卧式金相显微镜 / 大型研发数据处理倒置卧式金相显微镜
  • 1、目镜筒卧式三目镜筒、双目、45度倾斜 瞳距55-75mm
  • 2、目镜:大视野 WF10X(Φ18mm)
  • 3、物镜:放大倍率:4X、10X、20X、40X

By submitting you agree to our privacy policy.

01

제품 개요

AMM-8大型研发倒置卧式金相显微镜用于鉴别和分析各种金属和合金的组织结构,是金属材料检验、铸件质量的鉴定及金属材料处理后的金相组织的分析研究等工作的良好工具
AMM-8D大型研发数码倒置卧式金相显微镜是将传统的光学显微镜与数码相机通过光电转换有机的结合在一起,不仅可以在目镜上作显微观察,还能在数码相机显示屏幕上观察实时动态图像,并能将所需要的图片进行编辑、保存和打印。
AMM-8P大型研发视频图像倒置卧式金相显微镜是将传统的光学显微镜与图像处理通过光电转换有机的结合在一起,不仅可以在目镜上作显微观察,还能在视频显示屏幕上观察实时动态图像,同时还可以对金相组织结构进行直观明了的观察等。
AMM-8T大型研发图像处理倒置卧式金相显微镜是将传统的光学显微镜与计算机通过光电转换有机的结合在一起,不仅可以在目镜上作显微观察,还能在计算机显示屏幕上观察实时动态图像,并能将所需要的图片进行编辑、保存和打印。
AMM-8ST大型研发数据处理倒置卧式金相显微镜是将传统的光学显微镜与计算机通过光电转换有机的结合在一起,不仅可以在目镜上作显微观察,还能在计算机显示屏幕上观察实时动态图像,并能将所需要的图片进行编辑、保存和打印,同时还可以对金相组织结构进行数据处理分析,对照金相模块自动评级等。
二、AMM-8系列倒置卧式金相显微镜适用范围:
适合电子、冶金、化工和仪器仪表行业用于观察透明、半透明或不透明的物资,如金属陶瓷、集成块、印刷电路板、液晶板、薄膜、纤维、镀涂层以及其它非金属材料,也适合医药、农林、公安、学校、科研部门作观察分析用。同时也是金属学、矿物学、精密工程学、电子学等研究的理想仪器。
三、AMM-8系列倒置卧式金相显微镜技术参数:
型号MC006
AMM-8
AMM-8D
AMM-8P
AMM-8T
AMM-8ST
大型研发倒置卧式金相显微镜
大型研发数码倒置卧式金相显微镜
大型研发视频图像倒置卧式金相显微镜
大型研发图像处理倒置卧式金相显微镜
大型研发数据处理倒置卧式金相显微镜
1、目镜筒
卧式三目镜筒、双目、45度倾斜 瞳距55-75mm
2、目镜:
大视野 WF10X(Φ18mm)
选购:目镜: 惠更斯目镜5X;广角目镜10X(Φ20mm);12.5×目镜
3、物镜:
放大倍率:4X、10X、20X、40X
选购:平场消色差物镜2.5x(2.5/0.7);平场消色差物镜100X
4、总放大倍率
光学总放大倍数:40-400倍;选配总放大倍数:25-1000倍
5、带限位和松紧调节装置
同轴粗动调焦系统升降:15mm
同轴微动调焦系统微动格值:0.002mm(2μm)
6、同轴调节的双层机械移动
载物台规格:180×155mm
移动范围:75×50mm
7、照明系统
落射照明6V30W,卤素灯,亮度可调
8、电源
220V/50HZ
9、配备系统
标准主机1套
主机+数码成像系统1套
主机+视频图像处理系统1套
主机+图像处理系统1套
主机+数据处理系统1套

AMM-8ST Metallurgical Microscope supplied by CHWES. 10 key specifications available on request.

02

사양

大型研发倒置卧式金相显微镜大型研发数码倒置卧式金相显微镜 / 大型研发视频图像倒置卧式金相显微镜 / 大型研发图像处理倒置卧式金相显微镜 / 大型研发数据处理倒置卧式金相显微镜
1、目镜筒卧式三目镜筒、双目、45度倾斜 瞳距55-75mm
2、目镜:大视野 WF10X(Φ18mm)
3、物镜:放大倍率:4X、10X、20X、40X
4、总放大倍率光学总放大倍数:40-400倍;选配总放大倍数:25-1000倍
5、带限位和松紧调节装置同轴粗动调焦系统升降:15mm
6、同轴调节的双层机械移动载物台规格:180×155mm
7、照明系统落射照明6V30W,卤素灯,亮度可调
8、电源220V/50HZ
9、配备系统标准主机1套 / 主机+数码成像系统1套 / 主机+视频图像处理系统1套 / 主机+图像处理系统1套 / 主机+数据处理系统1套

* Generated by rule engine over the product database; for pre-selection only.

03

측정 원리

The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.

  • Bright field for routine microstructure, inclusions and decarburised layers.
  • Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
  • Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
  • DIC converts tiny height differences into contrast, ideal for polished, unetched samples.

Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.

04

Process animation

  1. Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
  2. Illumination and focus: select BF/DF/POL/DIC and focus.
  3. Image capture: trinocular port, 1× camera adapter, white balance.
  4. Scale calibration: calibrate µm per pixel with a stage micrometer.
  5. Measurement: grain size, case depth, coating thickness, inclusion rating.
0102030405
05

Calculation & formulas

1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.

2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.

3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.

4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).

5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.

06

규격

StandardTitleScope
GB/T 13298-2015Metallic materials — examination of microstructureMicrostructure rating
GB/T 6394-2017Determination of average grain sizeGrain size
ASTM E3-11Guide for metallographic specimen preparationPreparation
ASTM E112Determining average grain sizeGrain size
ISO 643Steels — micrographic determination of grain sizeGrain size

Export projects often require dual GB and ASTM reports; the software ships both rating charts.

07

선택 가이드

1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.

2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.

3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.

4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.

5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.

6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.

SeriesTypeTypical taskRecommended setup
HX-4A / HX-4BUpright metallurgicalRoutine structure, case depth5×/10×/40× + 5 MP camera
HX-G2A / G2BInvertedBatch samples, no re-mountingBrightfield + simple polariser
HX-G3ATrinocular invertedCase depth, rating, reportsCamera + analysis software
HX-G4C / G5AResearch invertedDarkfield/polarised/DICSemi-apochromat + motorised stage
HX-ZG7 / XSZ-146StereoFracture, solder, low-mag locatingZoom + ring light

Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.

08

시험 방법

Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.

Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.

Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.

Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.

09

Industry applications

  • Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
  • Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
  • Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
  • Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
  • Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
  • Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
  • Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
  • Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.
10

Price and lead time for this model

By submitting you agree to our privacy policy.

⇄0비교사양 비교