Medical devices2025

Non-contact needle dimension inspection with batch archiving

YRVMS2010E measures needle OD, ID, bevel angle and chamfer on 30 pieces in ten minutes, archiving images automatically for GMP traceability.

회사명
Syringe manufacturer, Zhejiang
주소
Wenzhou, Zhejiang
Non-contact needle dimension inspection with batch archiving
45 → 10 minPer batch
≤1.5 μmOD repeatability
2 d → 2 hAudit prep

Needles run 0.3–1.2 mm OD and the three-facet bevel angle drives puncture force. Micrometers and projectors deformed thin walls, and GMP audits require archived images per batch, which meant heavy manual screenshot work.

Solution: YRVMS2010E with a 10× objective and backlight, needles laid in a V-groove fixture; the program locates each part and measures OD, ID by transmission, bevel angle and chamfer length, storing results and images under the batch number.

Result: ten minutes for 30 pieces instead of 45, OD repeatability within 1.5 µm and bevel angle within 0.3°; audit preparation dropped from two days to two hours because batch reports are retrieved directly.

⇄0비교사양 비교