Additive manufacturing R&D2025

900℃ hardness evaluation of HIPed AM GH3536 parts

IMAS-HT900CM compared 900℃ microhardness maps of as-built vs HIPed GH3536, confirming 60% better uniformity after HIP.

회사명
An AM research center, S. China
주소
Guangdong
900℃ hardness evaluation of HIPed AM GH3536 parts
60%Uniformity gain

Printed GH3536 combustor parts showed localized early failure in 900℃ stress-rupture tests, suspected to come from non-uniform as-built microstructure.

Solution: IMAS-HT900CM mapped 7×7 indent arrays at 900℃ on as-built and HIPed (1120℃/100 MPa/4 h) samples, 500 gf load, 10 s dwell, HV0.5 maps verified per ISO 6507.

Result: the standard deviation of 900℃ hardness dropped from 42 HV (as-built) to 17 HV (HIPed), a 60% uniformity gain. Low-hardness bands matched failure sites, and HIP was written into the production specification.

⇄0비교사양 비교