Sản xuất đắp dần, nghiên cứu2025

Độ cứng GH3536 in 3D sau HIP ở 900℃

IMAS-HT900CM so sánh bản đồ độ cứng GH3536 ở 900℃ trước và sau HIP.

Công ty
Trung tâm sản xuất đắp dần, Nam Trung Quốc
Địa chỉ
Quảng Đông
Độ cứng GH3536 in 3D sau HIP ở 900℃
60%Cải thiện đồng đều

Printed GH3536 combustor parts showed localized early failure in 900℃ stress-rupture tests, suspected to come from non-uniform as-built microstructure.

Solution: IMAS-HT900CM mapped 7×7 indent arrays at 900℃ on as-built and HIPed (1120℃/100 MPa/4 h) samples, 500 gf load, 10 s dwell, HV0.5 maps verified per ISO 6507.

Result: the standard deviation of 900℃ hardness dropped from 42 HV (as-built) to 17 HV (HIPed), a 60% uniformity gain. Low-hardness bands matched failure sites, and HIP was written into the production specification.

⇄0So sánhSo sánh thông số