Consumer electronics2025

Phone frame FAI cut from 90 to 12 minutes

YRVMS4030CNC with bi-telecentric optics measures 142 dimensions in one program and generates the FAI report automatically.

회사명
Phone frame supplier, Guangdong
주소
Dongguan, Guangdong
Phone frame FAI cut from 90 to 12 minutes
12 minFAI time
98%First-pass rate

Every new frame model required a full first-article inspection: 142 dimensions including 36 position tolerances, previously done with a profile projector and calipers, two inspectors, 90 minutes, and frequent customer rejections because datums were inconsistent.

Solution: YRVMS4030CNC with 400×300 mm travel, 0.7–4.5× bi-telecentric lens and parallel backlight. The coordinate system follows the drawing datums; 142 features are programmed once and run in a single cycle, and the software exports an FAI sheet with datum notes.

Result: 12 minutes, repeatability within 2 µm, first-pass report acceptance up from 70% to 98%, and changeover now means loading a new program rather than relying on a senior inspector.

⇄0비교사양 비교