Elevators and rail2024

On-site straightness and twist of 50 m guide rails

HXM4050M-1 measures straightness and twist over 50 m in 12 minutes per rail, replacing the tensioned-wire plus microscope method.

会社名
Elevator guide-rail maker, Zhejiang
所在地
Huzhou, Zhejiang
On-site straightness and twist of 50 m guide rails
1 h → 12 minPer rail
≤0.05 mmRepeatability
88% → 96%First-pass yield

High-speed elevator rails require straightness within 0.5 mm per 5 m and twist within 0.4 mm. The old method tensioned a wire beside the rail and read it with a microscope; wire sag introduced up to 0.3 mm error over 50 m and one rail took an hour.

Solution: HXM4050M-1 (1″, 50 m) with a bridge and magnetic base, one station every 5 m for 11 stations; the autocollimator stays at one end while the mirror travels, straightness evaluated by the end-point method and twist read on the second axis.

Result: 12 minutes per rail, repeatability within 0.05 mm, 0.06 mm deviation from CMM sampling; out-of-tolerance sections are identified on site for straightening, raising first-pass yield from 88% to 96%.

⇄0比較仕様比較