Electronics2024

Batch inspection of drilled-hole position and diameter on PCB backplanes

YR3020CNC-T vision-plus-probe measures 200+ holes per backplane in one clamping, hole-position repeatability within 2 µm, changeover time down 80%.

Company
A telecom electronics plant, S. China
Address
Shenzhen, Guangdong
Batch inspection of drilled-hole position and diameter on PCB backplanes
40 → 6 minTime per board
1.0 → 1.67Position CPK

Telecom backplanes carry more than 200 holes each with a position tolerance of ±0.05 mm. Pin gauges and a profile projector took 40 minutes per board, and a 2 mm bow disturbed pure vision focusing.

Solution: a YR3020CNC-T vision/probe combination machine. The probe samples three points on the datum surface to compensate board bow, then the vision system measures every hole against the compensated coordinates; X/Y indication error is ±(3+L/200) µm and probe repeatability within 3 µm.

Result: six minutes per board for all holes, with data compared directly against drill-program coordinates, revealing a 0.012 mm backlash on the driller X axis which was then compensated.

Benefit: hole-position CPK rose from 1.0 to 1.67 and measurement changeover preparation fell by 80%.

⇄0CompareProduct comparison