Điện tử2024

Kiểm tra vị trí và đường kính lỗ khoan PCB

YR3020CNC-T đo 200+ lỗ một lần gá, lặp lại ≤2 µm.

Công ty
Nhà máy điện tử viễn thông, Nam Trung Quốc
Địa chỉ
Thâm Quyến, Quảng Đông
Danh mục
Máy đo ảnh
Kiểm tra vị trí và đường kính lỗ khoan PCB
40 → 6 minThời gian/tấm
1.0 → 1.67CPK vị trí

Telecom backplanes carry more than 200 holes each with a position tolerance of ±0.05 mm. Pin gauges and a profile projector took 40 minutes per board, and a 2 mm bow disturbed pure vision focusing.

Solution: a YR3020CNC-T vision/probe combination machine. The probe samples three points on the datum surface to compensate board bow, then the vision system measures every hole against the compensated coordinates; X/Y indication error is ±(3+L/200) µm and probe repeatability within 3 µm.

Result: six minutes per board for all holes, with data compared directly against drill-program coordinates, revealing a 0.012 mm backlash on the driller X axis which was then compensated.

Benefit: hole-position CPK rose from 1.0 to 1.67 and measurement changeover preparation fell by 80%.

⇄0So sánhSo sánh thông số