Hydraulics2024

Batch vision inspection of hydraulic spool shoulders and runout

YR4030-M with a V-block rotary fixture measures 8 shoulders, groove widths and runout in one clamping, 90 seconds per spool, diameter repeatability within 2 µm.

Company
A hydraulics components plant, C. China
Address
Wuhan, Hubei
Batch vision inspection of hydraulic spool shoulders and runout
12 min → 90 sTime per piece
92% → 98.5%First-pass yield

The proportional-valve spool runs in its sleeve with a 4-6 µm clearance, and its 8 shoulders hold a diameter tolerance of ±0.005 mm. Micrometers plus a bench centre took 12 minutes per spool, and runout needed a second setup on a different datum.

Solution: a YR4030-M vision machine with a precision V-block rotary fixture and tailstock. The camera captures the cylindrical generatrix while rotation samples points to fit each shoulder diameter and compute runout against the datum axis; X/Y indication error is ±(3+L/200) µm with diameter repeatability within 2 µm.

Result: all 8 shoulders in 90 seconds per spool, with SPC charts grouped by shoulder; grinding-wheel dressing changed from once per shift to trend-triggered.

Benefit: first-pass yield rose from 92% to 98.5%, and matched-pair regrinding dropped by about 70%.

⇄0CompareProduct comparison