Thủy lực2024

Đo vai trục và độ đảo van thủy lực

YR4030-M đo 8 vai và độ đảo trong 90 giây.

Công ty
Nhà máy linh kiện thủy lực, Trung Trung Quốc
Địa chỉ
Vũ Hán, Hồ Bắc
Danh mục
Máy đo ảnh
Đo vai trục và độ đảo van thủy lực
12 min → 90 sThời gian/chi tiết
92% → 98.5%Tỷ lệ đạt lần đầu

The proportional-valve spool runs in its sleeve with a 4-6 µm clearance, and its 8 shoulders hold a diameter tolerance of ±0.005 mm. Micrometers plus a bench centre took 12 minutes per spool, and runout needed a second setup on a different datum.

Solution: a YR4030-M vision machine with a precision V-block rotary fixture and tailstock. The camera captures the cylindrical generatrix while rotation samples points to fit each shoulder diameter and compute runout against the datum axis; X/Y indication error is ±(3+L/200) µm with diameter repeatability within 2 µm.

Result: all 8 shoulders in 90 seconds per spool, with SPC charts grouped by shoulder; grinding-wheel dressing changed from once per shift to trend-triggered.

Benefit: first-pass yield rose from 92% to 98.5%, and matched-pair regrinding dropped by about 70%.

⇄0So sánhSo sánh thông số