HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
YRWT-M200 · 2026-11-17 · +86 21 5748 2007
Electronic Universal Testing Machine · 200KN
By submitting you agree to our privacy policy.
YRWT-M200系列微机控制电子万能试验机可分为高精度的0.5级万能试验机与通用的1级万能试验机。万能试验机适用于 橡胶、塑料、纺织物、电线电缆、金属细丝、金属薄板、金属圆棒、 化纤、陶瓷材料、PVC材料、 包装材料、电子器件等材料的拉伸、拉脱、剥离、焊接强度、粘接强度、压缩、弯曲、等力学性能的测试,也适用于塑料、薄膜、医学、丝材、纤维、电子部件的拉脱、印刷电路板的剥离试验、电路板的弯曲强度试验、弹簧及机械制造加工等行业。也是科研院所、大专院校、工矿企业、技术监督、航空航天、质量检查等部门的理想测试设备. 根据GB/T2611《试验机通用技术条件》和GB/T 16491《电子式万能试验机》标准制造;根据GB/T12160《单轴试验用引伸计的规定》和GB/T16825《拉力试验机的检验》进行检定和验收。适用标准:适用ASTM、DIN、ISO、JIS、BS等国际标准。
性能特点:
1、自动清零:计算机接到试验开始指令,测量系统便自动清零;
2、自动返车:自动识别试验最大力,活动横梁自动高速返回初始位置;
3、自动存档:试验资料和实验条件自动存盘,杜绝因突然断电忘记存盘引起的资料丢失;
4、测试过程:试验过程及测量、显示、分析等均由微机完成;
5、显示方式:数据和曲线随试验过程动态显示;
6、结果再现:试验结果可任意存取,可对数据曲线再分析;
7、曲线遍历:试验完成后,可用鼠标找出试验曲线逐点的力值和变形数据,对求取各种材料的试验数据方便实用;
8、结果对比:多个试验特性曲线可用不同颜色迭加、再现、放大、呈现一组试样的分析比较;
9、曲线选择:可根据需要选择应力应变、力时间、强度时间等曲线进行显示和打印;
10、批量试验:对参数相同的试验一次设定后可顺次完成一批试样的试验;
11、试验报告:(标准格式)
拉伸:最大力、拉伸强度、断裂伸长率、弹性模量;
压缩:最大力、压缩强度、屈服强度、弹性模量,也可按用户要求的格式对试验报告进行编程和打印;
12、限位保护:具有程控和机械两级保护;
13、过载保护:当负载超过额定的10%时自动停机;
紧急停机:设有急停开关,用于紧急状态切断整机电源;
自动诊断:系统具有自动诊断功能,定时对测量系统,驱动系统进行过压,过流、超温等到检查,出现异常情况即刻停机;
14、实现主机和微机独立操作;
试验机工作条件:
1、电源:AC220V 400W
2、环境温度:10℃~40℃
3、相对湿度:≤80%
4、工作环境应清洁,无腐蚀性介质、无明显震源和电磁干扰,有可靠的地线。
技术参数:
1.规格:YRWT-M200;
2.精度等级:1级或0.5级;
3.最大负荷:200KN;
4.有效测力范围:1/100-100/%;
5.试验力分辨率,最大负荷50万码:内外不分文件,且全程分辨率不变。
6.有效试验宽度:570mm
7.有效试验空间:600mm
8.试验速度:0.1~500mm/min(任意调)
9. 速度精度:示值的±1%以内;
10.位移测量精度:示值的±1%以内;
11.变形测量精度:示值的±1%以内;
12.试台升降装置:快/慢两种速度控制,
13.试台安全装置:电子限位保护
14.试台返回:手动可以最高速度返回试验初始位置,自动可在试验结束后自动返回;
15.超载保护:超过最大负荷10%时自动保护;
16.电机:750W
17.主机尺寸:约700×450×1700mm
18.主机重量:约1500kg
配置:
YRWT-M200一台;
高精度传感器(精度FS0.02%)一只;
东能伺服系统一套;
高精度滚珠丝杠四根;
同步系统一套;
微机测量控制系统一套(含品牌电脑和软件等);
拉伸夹具一套;
遥控操作系统一套;
YRWT-M200 Electronic Universal Testing Machine (200KN) supplied by CHWES. 18 key specifications available on request.
| 规格 | YRWT-M200 |
|---|---|
| 精度等级 | 1级或0.5级 |
| 最大负荷 | 200KN |
| 有效测力范围 | 1/100-100/% |
| 试验力分辨率,最大负荷50万码 | 内外不分文件,且全程分辨率不变 |
| 有效试验宽度 | 570mm |
| 有效试验空间 | 600mm |
| 试验速度 | 0.1~500mm/min(任意调) |
| 9. 速度精度 | 示值的±1%以内 |
| 位移测量精度 | 示值的±1%以内 |
| 变形测量精度 | 示值的±1%以内 |
| 试台升降装置 | 快/慢两种速度控制 |
| 试台安全装置 | 电子限位保护 |
| 试台返回 | 手动可以最高速度返回试验初始位置,自动可在试验结束后自动返回 |
| 超载保护 | 超过最大负荷10%时自动保护 |
| 电机 | 750W |
| 主机尺寸 | 约700×450×1700mm |
| 主机重量 | 约1500kg;YRWT-M200一台;高精度传感器(精度FS0.02%)一只;东能伺服系统一套;高精度滚珠丝杠四根;同步系统一套;微机测量控制系统一套(含品牌电脑和软件等);拉伸夹具一套 |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.