HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
WEW-100B · 2026-11-17 · +86 21 5748 2007
Hydraulic Universal Testing Machine
By submitting you agree to our privacy policy.
WEW系列液压式万能试验机用于各种金属材料的拉伸、压缩、弯曲,增加剪切附具可做剪切试验, 亦可用作塑料、混凝土、水泥等非金属材料的压缩试验,增加简单附件,可完成胶带链条,钢丝绳、电焊条、瓦及构件的多种性能试验。
油缸采用:下置式主机,拉伸空间位于主机的上方,压缩、弯曲试验空间位于主机下横梁和工作台之间。
传动系统采用:下横梁升降电机经减速器、链传动机构、丝杠副传动,实现拉伸、压缩空间的调整。
液压系统采用:油箱内的油经过过滤油网被吸入油泵后,经油泵的输油管送到送油阀内,当送油手轮关闭时,由于油压作用而将活塞推开,油从回油管流回油箱,当送油手轮打开时,则油液经由油管进入工作油缸内,再通过压力油管经过回油阀体流回油箱。
控制系统采用:配有计算机、打印机、电子引伸计、光电编码器及通用试验软件,可以准确测定金属材料的抗拉强度、屈服强度、规定非比例延伸强度、延伸率、弹性模量等力学性能;试验结果:可以查询和打印(力-位移,力-变形,应力-位移,应力-变形,力-时间,变形-时间)六种曲线及相关试验数据。
保护系统采用:当试验力超过最大试验力的3%时,过载保护,油泵电机停机;当活塞升起达到上极限位置时,行程保护,油泵电机停机。
具有软件自检功能,能自诊断故障。
二.WEW-B系列液压式万能试验机性能特点:
1.下置式主机,高度低、重量轻,性价比高。
2.计算机控制显示,操作方便,数据读取方便直观。
3.支持开放编辑试验、编辑标准和编辑步骤,并支持导出导入试验、标准和步骤。
4.支持试验参数自定义。
5.采用开放式的EXCEL报表形式,支持用户自定义报表格式。
6.查询打印试验结果灵活方便,支持打印多个试样,自定义排序打印项目
7.程序支持分级管理两级(管理员、试验员)用户管理权限
8.当试验力超过最大试验力的3%时,过载保护,油泵电机停机
9.当活塞升起达到上极限位置时,行程保护,油泵电机停机
10.可定制试验机主机颜色。
三.WEW-B系列电脑液压式万能试验机技术特征:
型号MC009
WEW-100B
最大试验力
100KN
测试范围
5-100KN
测试准确度
±1%或±0.5%
实验力分辨率
0.01KN
位移测量分辨率
0.01mm
变形测量精度
0.01mm
拉伸空间
550
压缩空间
380
活塞行程
150
圆试样钳口夹持直径
Φ6-Φ26
扁试样钳口夹持厚度
0-15
扁试样最大夹持宽度
70
压盘尺寸
φ160mm或选配204X204mm
弯曲试验两点间距离
450
弯曲支滚宽度
120
弯曲支滚直径
Φ30
最大弯曲度
150
活塞最大移动速度
50mm/min
夹紧方式
手动夹紧
圆试样拉伸钳口
Φ6-Φ13、Φ13-Φ26
扁试样拉伸钳口
0-15
压缩附具
φ160mm
弯曲附具
试验两支点间最大距离450
油泵及横梁电机功率
1.1及0.75千瓦
主机外形尺寸
720×580×1950
测力柜外形尺寸
1000×700×1400
重量
1950kg
WEW-100B Hydraulic Universal Testing Machine supplied by CHWES. 27 key specifications available on request.
| 最大试验力 | 100KN |
|---|---|
| 测试范围 | 5-100KN |
| 测试准确度 | ±1%或±0.5% |
| 实验力分辨率 | 0.01KN |
| 位移测量分辨率 | 0.01mm |
| 变形测量精度 | 0.01mm |
| 拉伸空间 | 550 |
| 压缩空间 | 380 |
| 活塞行程 | 150 |
| 圆试样钳口夹持直径 | Φ6-Φ26 |
| 扁试样钳口夹持厚度 | 0-15 |
| 扁试样最大夹持宽度 | 70 |
| 压盘尺寸 | φ160mm或选配204X204mm |
| 弯曲试验两点间距离 | 450 |
| 弯曲支滚宽度 | 120 |
| 弯曲支滚直径 | Φ30 |
| 最大弯曲度 | 150 |
| 活塞最大移动速度 | 50mm/min |
| 夹紧方式 | 手动夹紧 |
| 圆试样拉伸钳口 | Φ6-Φ13、Φ13-Φ26 |
| 扁试样拉伸钳口 | 0-15 |
| 压缩附具 | φ160mm |
| 弯曲附具 | 试验两支点间最大距离450 |
| 油泵及横梁电机功率 | 1.1及0.75千瓦 |
| 主机外形尺寸 | 720×580×1950 |
| 测力柜外形尺寸 | 1000×700×1400 |
| 重量 | 1950kg |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.