HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
WDS10-300L · 2026-11-17 · +86 21 5748 2007
Electronic Universal Testing Machine · 1-30 t
By submitting you agree to our privacy policy.
一.WDS系列落地式数显电子万能试验机简介:
WDS系列落地式试验机包含6个型号,测试载荷 能力最大分别为10KN、 20KN、50KN、100KN、200KN、300KN,每种型号根据最终应用又可分为高精度的0.5级万能试验机与通用的1级万能试验机。万能试验机适用于 橡胶、塑料、纺织物、电线电缆、金属细丝、金属薄板、金属圆棒、 化纤、陶瓷材料、PVC材料、 包装材料、电子器件等材料的拉伸、拉脱、剥离、焊接强度、粘接强度、压缩、弯曲、等力学性能的测试,也适用于塑料、薄膜、医学、丝材、纤维、电子部件的拉脱、印刷电路板的剥离试验、电路板的弯曲强度试验、弹簧及机械制造加工等行业。
二. WDS系列落地式数显电子万能试验机性能特点:
1.可选配微机打印接口。
2.落地式框架结构,强度高、变形小,外形美观大方。
3.采用进口传感器及电机,整体提高测试性能,最高调速比可达1:100000及更高的分辨率。
4.具有可靠的性能以及限位、过流、过压、过载等保护装置。
5.可定制试验机主机颜色。
三. WDS系列落地式数显电子万能试验机技术特征:
型号MC009
WDS-10L
WDS-20L
WDS-50L
WDS-100L
WDS-200L
WDS-300L
最大试验力
10KN
20KN
50KN
100KN
200KN
300KN
测试范围
0.04-10KN
0.08-20KN
0.2-50KN
0.4-100KN
0.8-200KN
1.2-300KN
测试准确度
±1%或±0.5%
位移分辨率
0.0025mm
实验空间
拉:600;压:600;宽度:450;
拉伸:600;压缩:600;有效宽度:570;
实验级别
0.5或1级
位移速度
0.001-500mm/min(无级调速)
变形精度
±0.5%
主机尺寸
560X850X1900mm
750X1000X2300mm
800X1100X2600mm
整机重量
550kg
1100kg
2000kg
电源
单相,220V±10%,50Hz;三相,380V±10%,50Hz(200和300KN)
WDS10-300L Electronic Universal Testing Machine (1-30 t) supplied by CHWES. 11 key specifications available on request.
| 最大试验力 | 10KN / 20KN / 50KN / 100KN / 200KN / 300KN |
|---|---|
| 测试范围 | 0.04-10KN / 0.08-20KN / 0.2-50KN / 0.4-100KN / 0.8-200KN / 1.2-300KN |
| 测试准确度 | ±1%或±0.5% |
| 位移分辨率 | 0.0025mm |
| 实验空间 | 拉:600;压:600;宽度:450 / 拉伸:600;压缩:600;有效宽度:570 |
| 实验级别 | 0.5或1级 |
| 位移速度 | 0.001-500mm/min(无级调速) |
| 变形精度 | ±0.5% |
| 主机尺寸 | 560X850X1900mm / 750X1000X2300mm / 800X1100X2600mm |
| 整机重量 | 550kg / 1100kg / 2000kg |
| 电源 | 单相,220V±10%,50Hz;三相,380V±10%,50Hz(200和300KN) |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.