MMAS-100 Metallurgical Microscope (正置)

Metallurgical Microscope · 正置

ModellMMAS-100

    By submitting you agree to our privacy policy.

    01

    Überblick

    金相显微镜
    MMAS-4 金相显微镜分析系统(倒置偏光)
    MMAS-5 金相显微镜分析系统(正置偏光)
    MMAS-6 金相显微镜分析系统(正置透反)
    MMAS-8 金相显微镜分析系统(正置透反)
    MMAS-9 金相显微镜分析系统(正置偏光)
    MMAS-12 金相显微镜分析系统(正置偏光)
    MMAS-15 金相显微镜分析系统(无限远)
    MMAS-16 金相显微镜分析系统(正置偏光)
    MMAS-17 金相显微镜分析系统(正置透反) MMAS-18 金相显微镜分析系统(无限远)
    MMAS-19 金相显微镜分析系统(微分干涉)
    MMAS-20 金相显微镜分析系统(倒置偏光)
    MMAS-21 集成电路金相显微镜分析系统
    MMAS-22 金相显微镜分析系统(明暗场)
    MMAS-23 金相显微镜分析系统(微分干涉)
    MMAS-24 金相显微镜分析系统(微分干涉)
    MMAS-25 金相显微镜分析系统(微分干涉)
    MMAS-26 金相显微镜分析系统(明暗场)
    MMAS-27 金相显微镜分析系统(明暗场)
    MMAS-28 金相显微镜分析系统(明暗场)
    MMAS-29 金相显微镜分析系统(微分干涉)
    MMAS-100 金相显微镜分析系统(正置)
    MMAS-200 金相显微镜分析系统(正置)
    4XI 单目倒置金相显微镜
    4XB 双目倒置金相显微镜
    4XC 三目倒置金相显微镜 5XB 双目倒置偏光金相显微镜
    6XB 正置三目金相显微镜
    6XD 正置双目偏光金相显微镜
    7XB 大平台集成电路检测金相显微镜
    8XB 大平台明暗场芯片检查金相显微镜
    9XB 正置无限远偏光金相显微镜
    10XB 正置无限远明暗场偏光金相显微镜
    11XB 研究级透反射偏光暗场金相显微镜
    102XB 工业正置明暗场偏光金相显微镜
    4XC-ST 三目倒置金相显微镜
    5XB-PC 电脑型倒置偏光金相显微镜
    6XB-PC 电脑型正置金相显微镜
    6XD-PC 电脑型正置偏光金相显微镜
    7XB-PC 电脑型集成电路检测金相显微镜
    8XB-PC 电脑型芯片检查金相显微镜
    9XB-PC 电脑型正置偏光金相显微镜
    10XB-PC 电脑型正置明暗场金相显微镜
    11XB-PC 电脑型研究级DIC金相显微镜
    102XB-PC 电脑型正置明暗场金相显微镜
    AMM-8ST 三目倒置卧式金相显微镜
    AMM-17 透反射金相显微镜
    AMM-200 三目正置金相显微镜
    JC-10 读数显微镜
    BJ-X 便携式测量金相显微镜
    HMM-200 便携式测量金相显微镜
    HM-240 便携式金相显微镜
    HMM-240 便携式测量金相显微镜
    HMM-240S 便携式视频测量金相显微镜
    体视显微镜
    SM-2C 定倍体视显微镜(上光源)
    SM-3C 定倍体视显微镜(双光源)
    SM-4L 连续变倍体视显微镜
    SM-5L 连续变倍体视显微镜(上光源)
    SM-6L 连续变倍体视显微镜(双光源)
    SM-7L 连续变倍体视显微镜(双光源)
    SM-8L 连续变倍体视显微镜(上光源)
    SM-9L 连续变倍体视显微镜
    SM-10L 连续变倍体视显微镜(双光源)
    SMAS-11 体视显微图像分析测量系统
    SMAS-12 体视显微图像分析测量系统(单)
    SMAS-13 体视显微图像分析测量系统(双)
    SMAS-14 体视显微图像分析测量系统(双)
    SMAS-15 体视显微图像分析测量系统(单)
    SMAS-16 体视显微图像分析测量系统
    SMAS-17 体视显微图像分析测量系统(双)
    SMAS-18 体视显微图像分析测量系统
    WPAS-19 焊接熔深立体显微分析系统
    BPAS-360 三目立体珠宝显微镜
    BPAS-240 立体珠宝显微镜
    BPAS-120 立体珠宝显微镜
    PXS 定倍体视显微镜
    XYR 三目连续变倍体视显微镜
    XTZ-03 连续变倍体视显微镜
    XTZ-E 三目连续变倍体视显微镜
    生物显微镜
    BID-100 倒置相衬生物显微镜
    BID-200 倒置相衬生物显微镜
    BID-300 倒置无限远生物显微镜
    BID-400 倒置偏光调制相衬生物显微镜
    BID-500 倒置透射相衬生物显微镜
    BID-600 倒置透射微分干涉相衬生物显微镜
    BI-10 单目生物显微镜
    BI-11 单目生物显微镜
    BI-12 单目生物显微镜
    BI-13 单目生物显微镜
    BI-14 双目生物显微镜(偏光)
    BI-15 双目生物显微镜(偏光)
    BI-16 生物显微镜(相衬、无限远、示教)
    BI-17 生物显微镜(相衬、无限远、示教)
    BI-18 生物显微镜(相衬、无限远、示教)
    BI-19 生物显微镜(相衬、无限远、示教)
    BI-20 生物显微镜(相衬、无限远、示教)
    BI-21 生物显微镜(相衬、无限远)
    BI-22 生物显微镜(相衬、无限远)
    BI-23 生物显微镜(相衬、无限远、暗场)
    BI-24 生物显微镜(相衬、无限远、暗场
    BI-25 生物显微镜(相衬、无限远)
    BIAS-100 倒置相衬生物显微分析系统
    BIAS-200 倒置相衬生物显微分析系统
    BIAS-300 倒置无限远生物显微分析系统
    BIAS-400 偏光调制相衬生物显微分析系统
    BIAS-500 倒置透射相衬生物显微分析系统
    BIAS-600 微分干涉生物显微分析系统
    BIAS-714 正置生物显微分析系统
    BIAS-715 正置生物显微分析系统
    BIAS-716 正置生物显微分析系统
    BIAS-717 正置生物显微分析系统
    BIAS-718 正置生物显微分析系统
    BIAS-719 正置生物显微分析系统
    BIAS-720 大行程正置生物显微分析系统
    BIAS-721 大行程正置生物显微分析系统
    BIAS-722 大行程正置生物显微分析系统
    BIAS-723 无限远光学生物显微分析系统
    BIAS-724 超大平台生物显微分析系统
    BIAS-725 无限远光学生物显微分析系统
    XSD-100 三目倒置生物显微镜
    37XD 三目倒置生物显微镜
    XSP-8CA 三目正置生物显微镜
    偏光显微镜/荧光显微镜
    PM-10 简易偏光显微镜
    PM-11 偏光显微镜(透、反射)
    PM-12 偏光显微镜(透射)
    PM-13 偏光显微镜(无限远)
    PM-14 偏光显微镜(无限远、反射)
    PBAS-20 偏光显微分析系统
    PBAS-21 偏光显微分析系统
    PBAS-22 偏光显微分析系统
    PBAS-23 偏光显微分析系统
    PBAS-24 偏光显微分析系统
    PBAS-25 偏光显微分析系统
    PBAS-26 偏光显微分析系统
    PBAS-27 偏光显微分析系统
    FM-100 荧光显微镜(倒置、四色)
    FM-200 荧光显微镜(无限远、四色)
    FM-300 荧光显微镜
    FM-400 荧光显微镜(无限远)
    FM-500 荧光显微镜(无限远)
    FM-600 荧光显微镜(无限远)
    FBAS-100 荧光显微分析系统
    FBAS-200 荧光显微分析系统
    FBAS-300 荧光显微分析系统
    FBAS-400 荧光显微分析系统
    FBAS-500 荧光显微分析系统
    FBAS-600 荧光显微分析系统
    其它显微镜(工具/比较/进口)
    19JC 数字式万能工具显微镜
    19JPC 微机式万能工具显微镜
    19JPC-V 影像式万能工具显微镜
    XZB-4C 比较显微镜
    XZB-8F 比较显微镜
    XZB-14 比较显微镜
    进口显微镜
    洛氏硬度计
    显微硬度计
    维氏硬度计MC010系列
    布氏硬度计MC010系列
    邵氏硬度计/巴氏硬度计/韦氏硬度计MC010系列
    进口硬度计
    硬度计耗材/配件MC010系列
    自准直仪/平面度检查仪MC030系列
    金相切割机MC004系列
    金相磨抛机MC004系列
    金相镶嵌机MC004系列
    CMAS清洁度检测分析系统
    MMAS科研级工业自动显微镜测量系统
    IMAS复合材料断裂韧性残余应力检测仪
    BMAS材料气泡测量分析系统
    电子万能试验机MC009系列
    液压万能试验机MC009系列
    冲击试验机MC009系列
    光谱仪
    元素分析仪/碳硫分析仪
    色谱仪
    光度计
    影像测量仪
    投影仪
    三坐标测量机
    轮廓仪
    圆度仪
    探伤仪
    粗糙度仪
    测高仪
    测厚仪
    测温仪
    测振仪
    石油化工仪器
    气体检测仪
    食品仪器
    内窥镜
    人工智能设备
    4008127833/021-58391850
    扫一扫关注我们
    硬度计案例 硬度计技术
    试验机案例 试验机技术
    金相制样案例 金相制样技术
    自准直仪案例 自准直仪技术
    显微镜案例 显微镜技术
    实验室保养 实验室搬迁
    研润简介 研润发展历程
    人才与招聘
    研润旗下产品及公司简介
    维氏硬度计 洛氏硬度计 硬度计
    自准直仪 拉力试验机 硬度计
    万能试验机 金相抛光机 硬度计
    金相切割机 金相切割机 硬度计
    圆度仪 轮廓仪 硬度计 硬度计
    自准直仪 自准直仪 硬度计
    显微镜 金相显微镜 硬度计
    金相切割机 影像测量仪 硬度计
    布氏硬度计 自准直仪 金相磨抛机
    硬度计 自准直仪 硬度计,金相切割机
    上海研润光机科技有限公司成立于2005年,是
    一家以研发、生产、非标定制自动化检测设备,
    计算机软件开发为主的高新技术企业。主导产品
    光学和材料性能仪器,包括硬度计、试验机、显
    微镜、金相制样、工业自动化流水线定制、非标
    自动化质量控制检验、工业机器人、高精度光学
    自准直仪、残余应力测试、复合材料测试等设备。
    MMAS-100 金相显微镜测量分析系统

    MMAS-100 Metallurgical Microscope (正置) supplied by CHWES. 0 key specifications available on request.

    02

    Technische Daten

    * Generated by rule engine over the product database; for pre-selection only.

    03

    Messprinzip

    The metallurgical microscope uses an infinity-corrected optical path with reflected Köhler illumination. Light passes the collector, field stop and aperture stop, is deflected by a semi-transparent mirror through the objective onto the specimen, and returns through the same objective to the eyepiece or camera.

    • Bright field for routine microstructure, inclusions and decarburised layers.
    • Dark field collects scattered light to reveal grain boundaries, cracks and non-metallic inclusions.
    • Polarised light identifies anisotropic phases, spheroidised structures and coating stress.
    • DIC converts tiny height differences into contrast, ideal for polished, unetched samples.

    Objectives of 5× to 100× are combined with 10× eyepieces. Higher numerical aperture gives better resolution but shallower depth of field.

    04

    Process animation

    1. Sampling and preparation: sectioning, mounting, grinding, polishing, etching.
    2. Illumination and focus: select BF/DF/POL/DIC and focus.
    3. Image capture: trinocular port, 1× camera adapter, white balance.
    4. Scale calibration: calibrate µm per pixel with a stage micrometer.
    5. Measurement: grain size, case depth, coating thickness, inclusion rating.
    0102030405
    05

    Calculation & formulas

    1. System magnification: M = objective × eyepiece × adapter, e.g. 40× / 10× / 1× = 400×.

    2. Resolution: d = 0.61λ/NA (λ≈550 nm). A 40× objective with NA 0.65 resolves 0.52 µm; an NA 0.95 dry objective reaches 0.35 µm.

    3. Depth of field scales with λ/NA² — higher NA, shallower depth; use low NA for fracture surfaces.

    4. Grain size (GB/T 6394): at 100×, grains N per 645 mm² field follow N = 2G−1; counting 128 grains gives G = log2128 + 1 = 8. Intercept method: mean intercept L̄ = line length ÷ intercepts, G = −6.6437 lg L̄ (mm, 100×).

    5. Effective case depth: distance to 550 HV1, fitted from a micro-hardness traverse and averaged over three positions.

    06

    Normen

    StandardTitleScope
    GB/T 13298-2015Metallic materials — examination of microstructureMicrostructure rating
    GB/T 6394-2017Determination of average grain sizeGrain size
    ASTM E3-11Guide for metallographic specimen preparationPreparation
    ASTM E112Determining average grain sizeGrain size
    ISO 643Steels — micrographic determination of grain sizeGrain size

    Export projects often require dual GB and ASTM reports; the software ships both rating charts.

    07

    Auswahl

    1. Surface or cross-section: stereo microscopes (HX-ZG7, XSZ) for fracture surfaces, solder joints and coatings; upright or inverted metallurgical microscopes (HX-4, HX-G series) for microstructure, case depth and inclusions.

    2. Upright or inverted: upright for small specimens that are flipped often; inverted (HX-G3A/G4C/G5A) for large, heavy parts such as gears, shafts and tube sections that go straight onto the stage without re-mounting.

    3. Optics set the ceiling: plan achromats cover routine rating; semi-apochromats or apochromats with a research stand (HX-G5A) are needed for 1000× precipitates and brightfield/darkfield/polarised switching.

    4. Three levels of digitalisation: a 5 MP camera for images; camera plus analysis software (grain size, case depth, inclusions, porosity) for automatic rating and reports; motorised stage with scanning and stitching for unattended batches.

    5. Do not forget accessories: polariser, darkfield, DIC, and a microhardness interface.

    6. Room: an anti-vibration bench at 20±3 °C for research stands; keep preparation and microscopy rooms separate to avoid abrasive dust.

    SeriesTypeTypical taskRecommended setup
    HX-4A / HX-4BUpright metallurgicalRoutine structure, case depth5×/10×/40× + 5 MP camera
    HX-G2A / G2BInvertedBatch samples, no re-mountingBrightfield + simple polariser
    HX-G3ATrinocular invertedCase depth, rating, reportsCamera + analysis software
    HX-G4C / G5AResearch invertedDarkfield/polarised/DICSemi-apochromat + motorised stage
    HX-ZG7 / XSZ-146StereoFracture, solder, low-mag locatingZoom + ring light

    Common misconceptions: higher magnification is not better (numerical aperture limits resolution, 100× dry is the practical ceiling); ignoring stage travel so large samples do not fit; buying the stand without software and still rating by eye, which kills repeatability.

    08

    Prüfverfahren

    Preparation. Section perpendicular to the feature of interest. Keep hot-mounting below 150 °C for aluminium and quenched parts, or use cold mounting. Grind 320→600→800→1200, removing previous scratches at each step; polish with 3 µm then 1 µm diamond. Etchants: 4% nital for carbon steel (3–8 s), aqua regia or electrolytic for stainless, Keller for aluminium.

    Examination. Locate a representative field at 5×/10×, then switch to higher power. Rate grain size to GB/T 6394 by comparison or intercept. Measure case depth at 500× with an ocular scale or calibrated software, averaging five readings.

    Calibration. Verify µm/pixel daily with a stage micrometer, check against a certified specimen quarterly, record three fields per sample and archive images with scale bars.

    Pitfalls. Over-etching widens boundaries and fakes decarburisation; residual scratches can be mistaken for cracks; rounded mounting edges inflate case depth. Keep an unetched specimen for coating and crack review.

    09

    Industry applications

    • Steel and heat treatment: decarburised depth, carburised/nitrided case depth, grain size (GB/T 6394), non-metallic inclusions (GB/T 10561), banding and Widmanstätten rating.
    • Non-ferrous metals: aluminium grain and recrystallisation, alpha/beta ratio in brass, twinning and corrosion morphology in magnesium.
    • Welding and brazing: penetration, HAZ width, porosity and cracks, intermetallic thickness at dissimilar joints.
    • Additive manufacturing: porosity, lack-of-fusion defects, melt-pool morphology in SLM parts, porosity repeatability within 0.2%.
    • Bearings and gears: martensite rating, retained austenite, carbide network and banding, grinding burn and white layer.
    • Electronics: IMC thickness, plating cross-sections, PCB micro-sections, gold wire ball bonds (stereo plus metallurgical).
    • Powders and ceramics: particle morphology and size, sintered porosity, coating cross-section thickness.
    • Failure analysis: fracture surface macro and micro morphology, corrosion products, crack path and origin, with stereo microscopy for low-magnification locating.
    10

    Price and lead time for this model

    By submitting you agree to our privacy policy.

    ⇄0VergleichTechnischer Vergleich