HOTWEW300-600B Hydraulic Universal Testing Machine
Hydraulic Universal Testing Machine
- 最大试验力100KN / 300KN / 600KN / 1000KN
- 测试范围5-100KN / 12-300KN / 50-600KN / 50-1000KN
LDW-5 · 2026-11-17 · +86 21 5748 2007
Tensile Testing Machine · 0.05-5 t
By submitting you agree to our privacy policy.
LDW系列微机控制电子拉力试验机适用于橡胶、各种塑料的异型材、管材、板材、片材、薄膜、电线电缆、防水材料、金属丝等拉伸试验选配附具可做压缩、弯曲、环钢度、环柔性(扁平)、剥离、环拉伸(环径向拉力)、撕裂等机械性能的力学试验。本试验机广泛应用于化工行业、科研单位、大专院校、质量检测部门,更可做为专业生产单位理想的试验检测设备。
LDW系列微机控制电子拉力试验机是精密级单臂高档试验机,采用单片机和 PC 机分布控制系统,具有 PC 机控制的操作平台,通过 Windows98 、 Windows2000 或 WindowsXP 中文操作界面,在试验过程中时实显示试验的即时力值、位移值、断裂值、最大力值的峰值保持、自动停车、并能动态地时实绘制拉伸位移量与拉伸力值(压缩位移量与压缩力值)的曲线等功能,自动进行试验数据的记录及数据的后期处理,可自动打印试验报告,实现历史存盘,以便今后随时查询以前的试验数据,进行各种试验数据的对比研究。
WDW系列微机控制电子拉力试验机符合 GB/T16491 、GB/T1040 、 GB/T8804.1 、 GB/T8804.2 、 GB/T1041 GB/T9341 、 GB/T8808 、 GB/T18477 、 GB/T583 、 GB13022 等标准的规定,操作方便、设计合理、结构简单等特点,在同类机型中具有优良的性能价格比。
二、技术参数:
1.精度等级:1级
2.测 力 精 度:1N
3.速 度 精 度:< 示值的±1
4.试 验 速 度:0.5mm/min-500mm/min,14个档位速度
5.测力范围:50N、100N、200N、500N、1000N、2000N、5000N
6.电 源:220 AC50Hz
LDW-5 Tensile Testing Machine (0.05-5 t) supplied by CHWES. 6 key specifications available on request.
| 1.精度等级 | 1级 |
|---|---|
| 2.测 力 精 度 | 1N |
| 3.速 度 精 度 | < 示值的±1 |
| 4.试 验 速 度 | 0.5mm/min-500mm/min,14个档位速度 |
| 5.测力范围 | 50N、100N、200N、500N、1000N、2000N、5000N |
| 6.电 源 | 220 AC50Hz |
* Generated by rule engine over the product database; for pre-selection only.
A universal testing machine comprises the load frame, drive system, load cell, displacement/extensometer measurement and closed-loop control. A servo motor and screw drive the crosshead (or a servo valve drives the actuator); the load cell converts force to a signal, the extensometer measures strain over the gauge length, and the controller follows the programmed rate while logging force–displacement–strain.
Software derives upper and lower yield strength (ReH/ReL), tensile strength Rm, elongation A, reduction of area Z and modulus E. Control modes include speed, force, displacement and strain; GB/T 228.1-2021 requires strain control in the yield region (method A) for lower uncertainty.
1. Tensile strength: Rm = Fmax/S0; a 10 mm bar (S0=78.5 mm²) breaking at 62.8 kN gives Rm ≈ 800 MPa.
2. Yield: Rp0.2 is interpolated from the extensometer curve at 0.2% non-proportional extension.
3. Elongation & reduction: A = (Lu−L0)/L0; Z = (S0−Su)/S0; L0=50, Lu=62.5 mm → A = 25%.
4. Friction coefficient: μ = F/N; at N = 100 N and F = 32 N, μ = 0.32. Four-ball results report PB (last non-seizure) and PD (weld) loads.
5. Wear rate: k = V/(F·s); obtain V from Δm/ρ. Typical specific wear rates run 10⁻⁸–10⁻⁶ mm³/(N·m).
| Standard | Title | Scope |
|---|---|---|
| GB/T 228.1-2021 | Metallic materials — tensile testing, room temperature | Tension |
| ISO 6892-1 | Tensile testing at room temperature | Export projects |
| ASTM E8/E8M | Tension testing of metallic materials | Americas |
| GB/T 7314-2017 | Compression testing at room temperature | Compression |
| GB/T 232-2010 | Bend testing of metallic materials | Bending |
| GB/T 3098.1-2010 | Mechanical properties of fasteners | Fasteners |
1. Frame capacity plus 20–30%: Φ32 rebar yields near 630 kN so choose 1000 kN; M30 proof load is about 550 kN so choose 600–1000 kN. Running at full scale accelerates load-cell fatigue.
2. Servo-hydraulic or electromechanical: ≥300 kN with high stiffness and long stroke (rebar, bolts, concrete) needs servo-hydraulic (WAW/WEW); ≤300 kN with tight speed control (plastics, composites) suits electromechanical frames (WDS).
3. Display, digital or PC-controlled: a digital readout for single values; PC control (the -C suffix) for stress-strain curves, reports and batch data.
4. Fixtures often matter more than the frame: ribbed grips for rebar, proof-load fixtures for bolts, wrap grips for cables. Poor alignment costs 2–3 percentage points of elongation.
5. Extensometers and options: contact or video extensometers for modulus, high-temperature furnaces and extensometers, large platens with displacement control for battery crush.
6. Foundation and safety: a 1000 kN frame needs an isolated concrete base, guard doors and e-stops; hydraulic units need oil-temperature management.
| Series | Type | Force range | Typical specimens |
|---|---|---|---|
| WDS-1G to 300G | Electromechanical | 1–300 kN | Plastics, composites, small parts |
| WEW-100D to 1000D | Hydraulic, digital | 100–1000 kN | Rebar, bolts, metals |
| WEW-300C to 2000C | Hydraulic, PC | 300–2000 kN | High-strength bolts, forgings |
| WAW-100 to 1000 | Servo-hydraulic | 100–1000 kN | Rate-controlled acceptance |
| WAW-300C to 2000C | Servo-hydraulic, PC | 300–2000 kN | Bridges, nuclear components |
| WES-300C to 2000C | Compression | 300–2000 kN | Concrete, blocks |
| MMW-1A / MRS-10W | Friction and wear | — | Lubricants, coatings |
Three acceptance checks: verify force at 20/50/80% with a standard load cell; check alignment so a standard specimen breaks mid-gauge; run three identical specimens and look at scatter.
Specimen. Proportional (L₀ = 5.65√S₀) or non-proportional specimens to GB/T 228.1; transition radius R ≥ 5 mm; Ra ≤ 1.6 µm with work-hardened layers removed.
Measurement. Width and thickness at three positions within the gauge length, use the minimum for S₀; below 1 mm use optical or 0.001 mm micrometers.
Loading. 5–30 MPa/s in the elastic range, 0.00025/s strain rate at yield per method A, up to 0.0067/s in hardening; log at 100 Hz or more to catch yield serrations.
Evaluation. ReH is the first peak, ReL the lowest point, Rm the maximum force over S₀, A from the final gauge length (offset method), Z from the minimum fracture diameter.
Quality control. Daily check with a reference specimen, monthly force calibration with a class 0.3 proving instrument, half-yearly extensometer calibration, 23 ± 5 °C.