Năng lượng2024

Thử va đập Charpy nhiệt độ thấp bulông điện gió

JBS-300Z/500Z với bể CDW-60: thử Charpy -40 ℃ theo GB/T 229 trong 5 giây.

Công ty
Nhà máy linh kiện điện gió, Bắc Trung Quốc
Địa chỉ
Trương Gia Khẩu, Hà Bắc
Thử va đập Charpy nhiệt độ thấp bulông điện gió
39 JKV2 tại -40 ℃
±0.5 ℃Dao động nhiệt độ

Wind-tower high-strength bolts must reach KV2 of at least 27 J at -40 ℃. The manual pendulum with a dry-ice bath gave uneven temperatures, specimens warmed quickly after removal, and three-piece sets often spread more than 10 J, which the owner rejected.

Solution: a JBS-300Z/500Z automatic pendulum impact tester with 300/500 J dual ranges and automatic specimen feeding, plus a CDW-60 cascade-compressor bath holding -40 ℃ within ±0.5 ℃. The specimen travels from bath to strike within 5 seconds, meeting GB/T 229.

Result: 10.9-grade bolts measured 38, 41 and 39 J KV2 at -40 ℃, a 3 J spread; the tester passed verification to GB/T 3808.

Benefit: the low-temperature impact data were accepted by the owner at first submission, and bolt-lot release time was cut in half.

⇄0So sánhSo sánh thông số