Điện tử 3C2025

Kiểm tra biên dạng khung titan điện thoại

YR5040CNC đo biên dạng và 20 lỗ trong 4 phút.

Công ty
Nhà máy chi tiết chính xác 3C, Nam Trung Quốc
Địa chỉ
Đông Quan, Quảng Đông
Danh mục
Máy đo ảnh
Kiểm tra biên dạng khung titan điện thoại
次日 → 20 minPhản hồi bất thường
4 minThời gian/chi tiết

The titanium midframe requires a profile tolerance of 0.05 mm after CNC machining. Sending parts to the CMM room took two hours including queuing, so night-shift tool wear often surfaced only the next day, with hundreds of pieces at risk per batch.

Solution: a YR5040CNC vision machine installed beside the line on a granite base with 0.5 µm scales. 2D profile scans are compared against the DXF nominal contour, and 20 assembly holes are measured on an automatic datum; X/Y indication error is ±(3+L/200) µm and results go straight to MES over Ethernet.

Result: four minutes per piece with profile repeatability within 2 µm; on one night shift, tool wear pushed the profile 0.03 mm out of tolerance and the system alarmed and stopped the line within 20 minutes.

Benefit: response time shrank from next-day to 20 minutes, avoiding about 800 scrapped pieces in that batch alone.

⇄0So sánhSo sánh thông số