Ô tô2024

Máy đo biên dạng XZ-150G cho trục điện

XZ-150G đo biên dạng cổ phớt trục 15000 vòng/phút một lần gá; biên dạng siết từ 3 xuống 1,5 um, rò rỉ giảm từ 0,8% còn 0,1%.

Công ty
Nhà máy trục điện, Đông Trung Quốc
Địa chỉ
Ninh Ba, Chiết Giang
Máy đo biên dạng XZ-150G cho trục điện
1.5 μmBiên dạng cổ phớt
0.1%Tỷ lệ rò sớm

Motor shafts for 15000 rpm e-drives rely on seal-land contour and chamfer angle to set lip contact pressure. Profile projectors with ±5 um reading error were used for spot checks, and early leakage ran at 0.8%.

Solution: an XZ-150G high-precision profilometer measures seal-land contour, chamfer angle, fillet radius and bearing-seat straightness in one clamping, using a 2 um stylus tip with 0.02 um Z resolution; measured profiles are least-squares fitted against the nominal CAD contour.

Results: seal-land contour was tightened from 3 um to 1.5 um and the 25°±0.5° chamfer fully controlled. Early leakage fell to 0.1%, saving about 2 million yuan a year in warranty claims, with a 2-minute cycle enabling 100% inspection.

⇄0So sánhSo sánh thông số