Vật liệu compozit2025

Kiểm tra độ rỗng tấm CFRP bằng kim tương

MMAS-15 đo độ rỗng CFRP theo ASTM E2109, hiệu quả tăng 5 lần.

Công ty
Nhà máy sản phẩm CFRP, Đông Trung Quốc
Địa chỉ
Giang Tô
Danh mục
Kính hiển vi
Kiểm tra độ rỗng tấm CFRP bằng kim tương
5×Hiệu quả kiểm tra

CFRP drone-arm laminates were screened by ultrasonic C-scan, which is only qualitative, while the customer demanded quantitative proof of ≤1% porosity.

Solution: the MMAS-15 metallographic system applied the ASTM E2109 area method, counting pore area fraction over 20 consecutive fields at 50X (40 mm2 per specimen); C-scan grayscale over the same area was correlated to porosity.

Result: measured porosity was 0.6-0.9%, meeting the requirement. The correlation curve enables fast C-scan grading, cutting per-part inspection from 40 to 8 minutes, a 5x efficiency gain.

⇄0So sánhSo sánh thông số