Sản xuất đắp dần2025

Bản đồ vi độ cứng mẫu 316L in SLM

HVS-1000M lập bản đồ 20×10 HV0.3 trên 316L trong 40 phút.

Công ty
Viện sản xuất đắp dần, Đông Trung Quốc
Địa chỉ
Thượng Hải
Bản đồ vi độ cứng mẫu 316L in SLM
40 min200 điểm trong
185~215 HV0.3Dải độ cứng

The institute prints SLM 316L at 99.7% density, but hardness differences between melt-pool boundaries and centres matter for fatigue assessment. Placing 200 indentations by hand took two days, and coordinate records easily slipped.

Solution: an HVS-1000M micro-Vickers hardness tester with a motorised XY stage and automatic measurement software, HV0.3 (2.942 N) load with 10 s dwell. After polishing, the section is indented in a 20×10 array with automatic diagonal reading and hardness contour-map output.

Result: 200 points in 40 minutes, hardness 185-215 HV0.3, and the map clearly shows an about 80 µm softening band in the overlap zone; repeat positioning accuracy is ±2 µm.

Benefit: the mapping data drove parameter optimisation, and after hatch-spacing adjustment cross-section hardness uniformity improved by 8%.

⇄0So sánhSo sánh thông số