Твердые сплавы2023

HXZMP-3000 для автоподготовки твердосплавных пластин

HXZMP-3000 готовит 6 пластин WC-Co за цикл по ISO 4499; повторяемость оценки пористости A02B00 100%, цикл с 3 ч до 45 мин.

Компания
Завод твердосплавных пластин, Центр. Китай
Адрес
Чжучжоу, Хунань
HXZMP-3000 для автоподготовки твердосплавных пластин
45 minВремя подготовки
100%Воспроизводимость

WC-Co inserts are metallographically graded for porosity and eta phase per ISO 4499. Manual preparation took 3 hours per batch, and residual scratch differences between operators swung porosity ratings between A02 and A04 - a customer audit once rejected a lot.

Solution: an HXZMP-3000 automatic grinder-polisher with central force loading six inserts per run, with a locked program of diamond steps 30 um, 6 um, 3 um and 1 um, fixing speed, pressure and time instead of four manual steps.

Results: residual scratches are gone and three operators now rate A02B00 porosity with 100% agreement. Eta phase shows crisp boundaries after 10% potassium ferricyanide etch, matching cross-section hardness mapping. Preparation time fell to 45 minutes per batch and the annual customer audit closed with zero findings.

⇄0СравнениеСравнение характеристик